ISM COAT 3.0 30ml
- Traitement céramique haut de gamme
- Résistance importante
- Utilisable également sur les plastiques extérieurs bruts
Description
- - - NOUVELLE Kamikaze Collection ISM Coat 3.0 30ml - - -
FLEXIBLE, HYDROCARBON CERAMIC COATING.
Kamikaze Collection ISM Coat 2.0 blends optically clear hydrocarbons with ceramic components to provide a clear, candy-gloss shine to automotive paintwork. Unlike many ceramic coatings, ISM is free from solvents and volatile organic compounds (VOCs).
Features & Benefits:
- Easy to apply & easy to buff off
- Provides a candy-gloss, reflective shine
- Lasts for 24 - 36 months
- Repels water, dirt & grime
- Can also be used to restore plastic trim
- Designed to resist water spotting better than traditional ceramic coatings
- Non-solvent based & free from Volatile Organic Compounds (VOCs)
- High solids content, 27% organic, 51% inorganic
Directions for use:
- Wash and dry the vehicle.
- Polish to remove any paintwork blemishes prior to sealing.
- Wipe-down with a residue remover.
- Optimum application conditions: 15-25 °C, Humidity 40-70%.
- Using a dropper or pipette, apply a few straight lines of ISM 2.0 onto your applicator cloth.
- Starting with horizontal surfaces first, apply ISM 2.0 in straight lines only (no cross-hatch, no circular application) and slightly overlap from one line to the next. Work in small areas at a time (approx. 24" square).
- Immediately start your removal process otherwise the coating will become difficult to remove and may leave a smeary finish. If this happens, apply more product on top of the affected area and immediately remove.
- Using two different microfibres, for the initial wipe, and for the second wipe.
- Thoroughly wipe down the section to remove the residue. Your first wipe should remove 80% of the residue, and your second wipe should easily remove the remainder. Use small, circular motions and little to no pressure during removal.
- Multiple coats are not necessary.
- Infrared (IR) curing? set lamps at 70-75 °C for 10-15 minutes per panel.
- Keep dry for a minimum of 24 hours and do not wash the vehicle for 7 days.
- Maintain using Kamikaze Collection Over Coat for additional gloss & hydrophobicity.
Technical Specification:
- VOC-free
- Non-solvent based
- Non-flammable
- Durability: 24-36 months
- Water contact angle: 105 degrees
- pH tolerance: 2-11
- Thickness layer: 2 microns
- Hardness: 3-4H (pencil scale)
- Full curing time: 7 days
- Coverage: 30ml = 1-2 cars
Le Detailing vous passionne ?
Avis Vérifiés(1)
Anonymous A. publié le 05/07/2024 suite à une commande du 14/06/2024
Super easy to work with. Great gloss!!! Awasome water sheading
16 autres produits peuvent également vous intéresser
si commande avant 14h avec Chronopost
06 61 65 78 81 ou contact@addictauto.com
via notre banque/3DSECURE
gagnez des € de réduction
mais surtout satisfait