EXPÉDITION LE JOUR-MÊME pour toute commande passée avant 14h (du lundi au vendredi) / Livraison OFFERTE dès 150€ d’achats (France métro & Belgique).

V1 BOOSTER 300ml

V1 BOOSTER 300ml (céramique en spray)

Autotriz
  • Protection très hydrophobe fortement chargée en céramique
  • S'utilise seule ou sur une protection existante
  • Durabilité: 6 à 12 mois
Produit victime de son succès

Saisissez votre email pour être prévenu dès qu'il sera disponible.


Description

Autotriz V1 Booster est une protection en spray très chargée en céramique.

Grâce à ses propriétés spécifiques, cette protection va vous permettre de protéger durablement votre véhicule en créant une couche protectrice sur le dessus de votre vernis.

Idéal en maintenance sur un traitement céramique, le V1 Booster d'Autotriz est également une excellente protection à part entière qui s'avèrera très efficace sur un véhicule non protégé.

La protection laissera un toucher doux et lisse et apportera un effet très hydrophobe (déperlant), ce qui limitera l'accroche de nombreux contaminants et facilitera les futurs lavages.

Composé de la même base que les céramiques les plus performantes de la marque, le V1 Booster est le parfait produit de maintenance pour l'entretien de votre céramique Autotriz V1 3D Matrix et V1 Light.


Conseils d'utilisation



The product is for professional use and should be applied by approved applicators only. Test on a small area or apply a test coat before application.

APPLICATION OF V1 3D MATRIX COATING BOOSTER

Shake well before use.
Get ready with 2 pieces of brand new, lint-free microfiber towel. (It is recommended that new towels to be rinsed or washed with water prior to use to reduce the loosing lint)
It is recommended to do a 2 ft. x 4 ft. area or 4 ft. x 4 ft. at a time.
Spray on V1 3D Matrix Coating Booster on surface.
Wait for 30 seconds (time is vary from different countries and different season depending on temperature or humidity, ask distributors for recommendation), use first towel to remove the product.
Go immediately over with second microfiber towel with polishing motion until the surface is free from residue.
When the whole car is applied, allow curing of 1-2 hours.



Product must be applied at an ambient temperature of at least + 5°C and a relative humidity of 30 % - 80 %. Avoid direct sunlight! Apply the coating in dry conditions. Any mistakes can be rectified within approx. 5 min of application. Traces of water in the applicator should also be avoided. Applicators dampened with water should not be used. 3D Matrix Coating Booster is dry-to-touch after about one hour.
The recommended curing conditions (until water resistant) are:
- Room temperature: 1-2 hours
- 80 °C (Infra-red curing): 30 minutes

The 3D Matrix coating Booster is fully effective after 1-2 hours curing at room temperature. During this time, the vehicles should not be driven into a vehicle wash.


LIVRAISON EXPRESS 24h
LIVRAISON EXPRESS 24h

si commande avant 14h avec Chronopost

SERVICE CLIENT
SERVICE CLIENT

06 61 65 78 81 ou contact@addictauto.com

PAIEMENT SÉCURISÉ
PAIEMENT SÉCURISÉ

via notre banque/3DSECURE

PROGRAMME DE FIDÉLITÉ
PROGRAMME DE FIDÉLITÉ

gagnez des € de réduction

SATISFAIT OU REMBOURSÉ
SATISFAIT OU REMBOURSÉ

mais surtout satisfait