EXPÉDITION LE JOUR-MÊME pour toute commande passée avant 14h (du lundi au vendredi) / Livraison OFFERTE dès 150€ d’achats (France métro & Belgique).

ISM COAT 3.0 30ml

  • Traitement céramique haut de gamme
  • Résistance importante
  • Utilisable également sur les plastiques extérieurs bruts
Produit victime de son succès

Saisissez votre email pour être prévenu dès qu'il sera disponible.


Important! Avez-vous déjà les produits complémentaires suivants ?

  • ISM COAT 3.0 30ml
    ISM COAT 3.0 30ml
    175,90 €
  • add
  • ZERO FINISH HD 40x40cm
    ZERO FINISH HD 40x40cm
    4,99 €
  • add
  • REBORN (cleaner IPA)
    REBORN (cleaner IPA)
    11,99 €
  • add
  • BLACK SUEDE 10x10cm (x3)
    BLACK SUEDE 10x10cm...
    2,90 €
  • Prix total :


Description

- - - NOUVELLE Kamikaze Collection ISM Coat 3.0 30ml - - -

FLEXIBLE, HYDROCARBON CERAMIC COATING.

Kamikaze Collection ISM Coat 2.0 blends optically clear hydrocarbons with ceramic components to provide a clear, candy-gloss shine to automotive paintwork. Unlike many ceramic coatings, ISM is free from solvents and volatile organic compounds (VOCs).

Features & Benefits:

  • Easy to apply & easy to buff off
  • Provides a candy-gloss, reflective shine
  • Lasts for 24 - 36 months
  • Repels water, dirt & grime
  • Can also be used to restore plastic trim
  • Designed to resist water spotting better than traditional ceramic coatings
  • Non-solvent based & free from Volatile Organic Compounds (VOCs)
  • High solids content, 27% organic, 51% inorganic

Directions for use:

  • Wash and dry the vehicle.
  • Polish to remove any paintwork blemishes prior to sealing.
  • Wipe-down with a residue remover.
  • Optimum application conditions: 15-25 °C, Humidity 40-70%.
  • Using a dropper or pipette, apply a few straight lines of ISM 2.0 onto your applicator cloth.
  • Starting with horizontal surfaces first, apply ISM 2.0 in straight lines only (no cross-hatch, no circular application) and slightly overlap from one line to the next. Work in small areas at a time (approx. 24" square).
  • Immediately start your removal process otherwise the coating will become difficult to remove and may leave a smeary finish. If this happens, apply more product on top of the affected area and immediately remove.
  • Using two different microfibres, for the initial wipe, and for the second wipe.
  • Thoroughly wipe down the section to remove the residue. Your first wipe should remove 80% of the residue, and your second wipe should easily remove the remainder. Use small, circular motions and little to no pressure during removal.
  • Multiple coats are not necessary.
  • Infrared (IR) curing? set lamps at 70-75 °C for 10-15 minutes per panel.
  • Keep dry for a minimum of 24 hours and do not wash the vehicle for 7 days.
  • Maintain using Kamikaze Collection Over Coat for additional gloss & hydrophobicity.

Technical Specification:

  • VOC-free
  • Non-solvent based
  • Non-flammable
  • Durability: 24-36 months
  • Water contact angle: 105 degrees
  • pH tolerance: 2-11
  • Thickness layer: 2 microns
  • Hardness: 3-4H (pencil scale)
  • Full curing time: 7 days
  • Coverage: 30ml = 1-2 cars

Le Detailing vous passionne ?

Suivez l’actualité, découvrez les nouveautés et profitez des bons plans :

LIVRAISON EXPRESS 24h
LIVRAISON EXPRESS 24h

si commande avant 14h avec Chronopost

SERVICE CLIENT
SERVICE CLIENT

06 61 65 78 81 ou contact@addictauto.com

PAIEMENT SÉCURISÉ
PAIEMENT SÉCURISÉ

via notre banque/3DSECURE

PROGRAMME DE FIDÉLITÉ
PROGRAMME DE FIDÉLITÉ

gagnez des € de réduction

SATISFAIT OU REMBOURSÉ
SATISFAIT OU REMBOURSÉ

mais surtout satisfait