KING OF GLOSS LIGHT 300g

Use 

1. Clean your vehicle using a shampoo.
2. To maximize the effect of the wax, apply the clay as well as a cleaner on the vehicle.
3. Place the sponge provided for this purpose in the jar and make 4 to 5 circular movements to soak it.
4. Spread the wax as evenly as possible (no need to moisten the sponge) and crisscross the passes (from top to bottom then from left to right).
5. Let dry for about 10 minutes under normal conditions (in case of low temperature, increase this exposure time to ensure adhesion to the bodywork)
6. Use a quality buffing microfiber to wipe off the excess wax (remember to fold your MF during the process if necessary)

As with the application of any wax, proceed panel by panel.

Tip: It is recommended to wait 12 to 24h before applying a second coat.

Important
Always apply in the shade, on a cool surface and do not let the product dry.
Use gloves and, if necessary, goggles.

Labeling/Allergens

H315: Causes skin irritation.
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic organisms, causes long-term adverse effects.

Hydrocarbons, C9-C12, n-alkanes, isoalkanes, cyclics, aromatic (2-25%).

Warning, follow the precautions for use.