KING OF GLOSS DARK 300g

Use 

1. Clean your vehicle using a shampoo.
2. To maximize the effect of the wax, apply the clay as well as a cleaner on the vehicle.
3. Place the sponge intended for this purpose in the jar and make 4 to 5 circular movements to soak it.
4. Spread the wax as evenly as possible (no need to moisten the sponge) and cross the passes (from top to bottom then from left to right).
5. Let dry for about 10 minutes under normal conditions (in case of low temperature, increase this drying time to guarantee adhesion to the bodywork).
6. Use a quality buffing microfiber to wipe off the excess wax (remember to fold your MF during the process if necessary).

As with applying any wax, work panel by panel.

Tip: It is recommended to wait 12 to 24 hours before applying a second coat.

Important
Always apply in the shade, on a cool surface and do not let the product dry.
Use gloves and, if necessary, goggles.

Labeling/Allergens

H228: Flammable solid material.
H319: Causes severe eye irritation.
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic organisms, causes long-term adverse effects.

Hydrocarbons, C9-C12, n-alkanes, isoalkanes, cyclics, aromatics (2–25%).

Danger, observe the precautions for use.