SAME-DAY SHIPPING for orders placed before 2 PM (Monday to Friday) / FREE delivery on orders of €150 or more (Mainland France & Belgium).

SYNTHETIC WAX 100ml (long-lasting wax)

Zvizzer
  • Hybrid protective wax (carnauba and polymers)
  • Up to 10 months or 7000 km
  • Very easy to apply and wipe off
€53.25
En stock


We recommend you the purchase of the following complementary products

  • SYNTHETIC WAX 100ml (long-lasting wax)
    SYNTHETIC WAX 100ml...
    €53.25
  • add
  • DUAL SIDE 40X40cm (pack of 2)
    DUAL SIDE 40X40cm...
    €9.99
  • add
  • TICKLER (microfiber applicator)
    TICKLER (microfiber...
    €3.33
  • add
  • REBORN (cleaner IPA)
    REBORN (cleaner IPA)
    €9.99
  • Total price:


Description

ZviZZer Wax Synthetic (formerly called ZviZZer Hybrid Wax) is a premium hybrid wax which, in addition to providing long-lasting protection to your varnish, significantly enhances the finish and gloss of your paint.

In addition, ZviZZer Wax Synthetic makes the bodywork surface very hydrophobic, allowing it to repel water and a good amount of dirt, greatly facilitating future maintenance.

Afterwards, you just need to wash the vehicle with a pH-neutral prewash product as well as a pH-neutral wash shampoo!

ZviZZer Wax Synthetic is a hybrid wax based on natural carnauba wax and synthetic polymer-based wax.

It is the best of both worlds: carnauba to provide that warm and deep finish, and polymers for resistance, durability, and pronounced hydrophobic properties.

Another advantage compared to other waxes: application and wiping are very simple :)

You can apply the wax to the entire bodywork before wiping it off! Depending on the ambient temperature, you can wipe after 20 minutes (warm) to 40 minutes (cold) of drying. 

  • Durability = up to 10 months or 7000 km
  • Usable on all types of varnish.
  • Maximum hydrophobicity obtained after 4 to 6 hours of drying (without water) after the last applied layer.
  • The 100ml jar can treat around 12 medium-sized vehicles (in one layer)!

Good to know:

ZviZZer Wax Synthetic is also compatible for protecting rims!

Capacity: 100ml

ZV069WS

Specific References

ean13
4260762261989

Product usage

Dilution
None.


Use

  1. Make sure the surface is perfectly clean and free of contaminants (proceed with mechanical decontamination if necessary)
  2. Degrease the surface with a cleaner/ipa
  3. Apply a small amount of ZviZZer Wax Synthetic to a microfiber applicator
  4. Spread the wax using circular motions. The layer must be as thin as possible!
  5. Wait about 20 minutes (temperature 20 degrees or higher) and about 40 minutes (temperature below 20 degrees)
  6. Once the vehicle is finished, wait 4 to 6 hours before any exposure to water.

To further enhance the appearance, hydrophobicity, and resistance, you can apply 2 or 3 layers! (wait about 4 to 6 hours between each layer).  

Good to knowIf you have done polishing beforehand and used the polish ZviZZer Ultra fine cut swirl remover & Sealing in the final step, you should not use cleaner/ipa before applying the ZviZZer Synthetic Wax.


Important 
Always work in the shade, on a cool surface, and do not let the product dry.
Use gloves and goggles if necessary.


Labeling/Allergens 

No. UFI: -

Warning, follow the precautions for use.



EXPRESS DELIVERY 24h
EXPRESS DELIVERY 24h

if order before 2pm with Chronopost

CUSTOMER SERVICE
CUSTOMER SERVICE

+33661657881 or contact@addictauto.com

SECURE PAYMENT
SECURE PAYMENT

via our bank/3DSECURE

LOYALTY PROGRAM
LOYALTY PROGRAM

get € discount

SATISFIED OR REFUNDED
SATISFIED OR REFUNDED

but above all satisfied