NEW FUSSO COAT 12 MONTHS LIGHT 200g

By Soft99

Synthetic wax based on PTFE (Teflon)
Long-lasting protection up to 12 months
Ideal for light colors

€29.92

En stock

We recommend you the purchase of the following complementary products

NEW FUSSO COAT 12...

€29.92
PADDOCK (IPA...

€10.00
BUFFING KING 45x38cm

€11.66
Total price:

Description

NEW 2019 VERSION OF THE MOST FAMOUS SOFT99 WAX!
The major evolutions of this wax are as follows:
- Modification of the composition (more "friendly" for the user and for the environment)
- Simpler application!
- Less strong smell
- Updated packaging

Soft99 New Fusso Coat 12 months Light is a synthetic wax (sealant) with impressive properties.

It contains PTFE (polytetrafluoroethylene), which has a very strong hydrophobic capacity and effectively protects the bodywork from rain, dirt and any other everyday aggressions. The thick and resistant hydrophobic protection left by the New Fusso Coat perfectly repels water, which will flow off easily and gently from your bodywork.

The great strength of this wax lies in its durability over time: indeed, the protection lasts up to 12 months (if applied properly, with normal climatic conditions and with regular maintenance respecting the Detailing codes).

The New Fusso Coat from Soft99 also helps to mask the swirls present on your bodywork.

This Light version is particularly suitable for light vehicles (white, light gray, yellow…).

It is delivered with its foam applicator.

To prolong the effectiveness of the Fusso Coat, it is advisable to use the Soft99 SPEED BARRIER (dedicated quick wax with the same composition as the Fusso) after washing.

Reference SO005FCL

Specific References

ean13: 4975759103318

Product usage

Dilution
None.

Use

Clean your vehicle beforehand using a shampoo.
Dry your vehicle.
The surface to be protected must be perfectly clean (and ideally degreased with an IPA cleaner such as PADDOCK) in order to ensure long-lasting protection.
Place the sponge provided for this purpose in the container and make 4 to 5 circular movements to soak it.
Spread the wax as evenly as possible and cross the passes (from top to bottom then from left to right or in small circles).
Let it sit for about 3 minutes under normal conditions (20°); in case of higher temperatures, slightly reduce this setting time.
Use a quality buffing microfiber such as Buffing King to wipe off the excess wax (remember to fold your MF during the process if necessary).

As with the application of any wax, proceed panel by panel. It is recommended to wait 12 to 24 hours before applying a second layer.

Tip: To allow optimal polymerization of the wax on your bodywork, it is recommended not to wash your vehicle during the 24 hours following application.

Important

Always apply in the shade, on a cool surface, and do not allow the product to dry.
Use gloves and goggles if necessary.

Labeling/Allergens

H228: Flammable solid substance.
H411: Toxic to aquatic organisms, causes long-term adverse effects.

Dangerous, follow the precautions for use.