FINAL FINISH 3000

By Menzerna

Polish for finishing
Allows the removal of holograms
Brings a beautiful shine

€10.75

In stock

Important! Do you already have the following complementary products?

Description

Menzerna Final Finish 3000 is a finishing polish containing ultra-fine abrasives that remove holograms and imperfections remaining after the use of more abrasive polishes.

It is the ideal finishing polish after using Heavy Cut Compound 1100 (hard) and Medium Cut Polish 2500 (medium).

Its great strength lies in its ability to leave a very shiny and deep finish.

Ideal on all types of varnish, Final Finish 3000 can be used with a polisher (rotary or orbital) or by hand.

Like all Menzerna products, it contains no silicone or fillers so you know exactly where you stand in your polishing stage.

Menzerna scale
- Abrasiveness (3/10)
- Gloss (9/10)

Available in 250ml and 1L.

Reference MZ001FF3000-250

Specific References

ean13: 4260063010835

Product usage

Dilution
None.

Use

Always work on a clean and dry surface.
Shake the bottle before use.
Apply a few small amounts of polish onto a polishing pad.
Work the polish until the desired result is achieved.
Check your work by spraying a cleaner/IPA onto an anti-scratch microfiber for polish wiping.
With this same microfiber, wipe off the polish residues

Important
Always apply in the shade, on a cool surface.
Use gloves and, if necessary, goggles and a mask.

Labeling/Allergens

EUH066: Repeated exposure may cause dryness or cracking of the skin.
EUH208: 1,2-benzisothiazol-3(2H)-one. May cause an allergic reaction.
EUH210: Safety data sheet available on request.