EP802 ROTARY POLISHER (circular)

Shine Mate EP802 is a rotary polisher (circular polisher).

A rotary polisher allows for faster correction than a dual action and will be more effective on hard paint or very damaged paint.
However, more attention is required during correction in order not to reduce the clear coat too much.

Thanks to its maximum power of 1500w, it will offer consistent efficiency regardless of the speed range used.
It also features a Soft Start system (progressive start) which prevents polish from being thrown when the backing plate starts up, as well as a speed controller with 6 positions.

Offering a good grip with its soft grip handle, it will be ideal for all polishing work on large surfaces.
The EP802 is ideal when used with 150mm (6") backing plates.
The backing plate supplied with the machine is flexible on the edges to provide more smoothness during polishing.

GOOD TO KNOW
Always remember to use a pad larger than your backing plate to avoid any risk of damaging your paint.
Since the Shine Mate EP802 comes with a 150mm backing plate, you will therefore need pads of at least 155mm.

Specifications:
Power: 1500w max (1050w nominal)
Electricity: 220-240 VAC, 50 - 60 Hz (French plug)
Thread type: M14
Rotations per minute: 700 - 2500 rpm
Accepted plate sizes: 150mm to 180mm
Weight: 2.2 Kg
Cable: 5m

Delivered with:
150mm backing plate
Tool for changing the backing plate
Side handle
Additional set of carbon brushes
Manual