ERO600 G2 ORBITAL POLISHER SHINE MATE (orbit 9mm)

Orbital polisher / buffer for bodywork all vehicles (car, truck, utility vehicle, motorcycle, ...)

Shine Mate ERO600 G2 is the ideal orbital polisher for Detailing enthusiasts who have never used a polisher in their life as well as for experienced users who are looking for a reliable and high‑performance polisher.

This G2 version stands out from the previous version by a redesigned design and ergonomics and the introduction of a more optimized and technological plate, the Dust Devil. It allows increased heat dissipation and easier extraction of polish dust.

On the technical side, we find everything that has made the success of the ERO600 for so many years ;)

The speed controller allows you to select one of 6 speeds ranging from 2500 to 6500 oscillations per minute.

Unlike its competitors such as the Das‑6 Pro / Das 6 Pro orbital polisher, the Shine Mate ERO600 has multiple advantages:

• Reduced weight of almost 20% (only 2 kg)
• Significantly reduced vibrations
• Better overall finish (plastics, screws...)
• Soft start (vs simple ON‑OFF)
• 9 mm eccentricity (vs 8 mm)
• 5 m cable (vs 4 m)

Thanks to its 900 W max power and its CSE system (Constant Speed Electronic), this polisher / buffer allows you to correct all types of clear coats, from the softest to the hardest, while leaving an excellent finish and shine.

With its orbital (eccentric) operation, it is safe and prevents any risk of cutting through the paintwork of your vehicle!

GOOD TO KNOW
Always remember to use a pad larger than your plate (backing plate) to avoid any risk of damaging your paintwork. The Shine Mate ERO600 being delivered with a 125 mm plate (backing plate), you will therefore need pads with a velcro of at least 125 mm, such as the ZviZZer THERMO Trapez. 

Specifications:
Power: 900 W max (600 W in use)
Electricity: 220‑240 VAC, 50‑60 Hz (French plug)
OPM: 2500‑6500 oscillations/minute
Orbit: 9 mm
Thread: M8
Speed selector: 6 speeds (anti‑splash start)
Weight: 2 kg
Cable length: 5 m

Delivered with: 
125 mm perforated and ventilated Dust Devil plate
Tool for plate (backing plate) replacement
Right handle
Spare set of carbon brushes
Instruction manual.

This is a reference machine used all over the world!

ERO600G2