NATURAL WAX 100ml (long-lasting wax)

By Zvizzer

Natural protective wax (carnauba)
Up to 8 months or 5000 km
Very easy to apply and wipe off

€49.54

En stock

We recommend you the purchase of the following complementary products

NATURAL WAX 100ml...

€49.54
DUAL SIDE 40X40cm...

€9.99
REBORN (cleaner IPA)

€9.99
wax pad red puck...

€3.33
Total price:

Description

ZviZZer Wax Natural is a natural wax based on premium carnauba, which, in addition to providing durable protection to your paint, significantly enhances the appearance and shine of your paintwork.

In addition, ZviZZer Wax Natural makes the surface of the bodywork very hydrophobic, allowing it to repel water and a large part of dirt, greatly facilitating future maintenance.

Afterwards, you just need to wash the vehicle with a neutral pH prewash product as well as a neutral pH car shampoo!

ZviZZer Wax Natural is a wax based on natural carnauba wax that is known for giving a warm and deep finish.

Another advantage compared to other waxes: application and wiping are very easy :)

You can apply the wax to the entire bodywork before wiping it! Depending on the ambient temperature, you can wipe after 15 minutes (warm) to 30 minutes (cold) of drying.

Durability = up to 8 months or 5000 km
Usable on all types of paint.
Maximum hydrophobicity obtained after 4 to 6 hours of drying (without water) after the last layer applied.
The 100ml jar allows treatment of about 12 medium-sized vehicles (in one layer)!

Capacity: 100ml

Reference ZV068WN

Specific References

ean13: 4260762261996

Product usage

Dilution

None

Use

Make sure the surface is perfectly clean and free of contaminants (perform mechanical decontamination if necessary)
Degrease the surface with a cleaner/ipa
Apply a small amount of ZviZZer Wax Natural on a microfiber applicator
Spread the wax with circular motions. The layer must be as thin as possible!
Wait about 15 minutes (temperature 20 degrees or more) and about 30 minutes (temperature below 20 degrees)
Once the vehicle is finished, wait 4 to 6 hours before any exposure to water.

To further enhance the finish, hydrophobicity, and durability, you can apply 2 or 3 layers! (wait about 4 to 6 hours between each layer).

Good to know:

If you have performed polishing beforehand and used the polish ZviZZer Ultra fine cut swirl remover & Sealing in the last step, you should not use cleaner/ipa before applying the ZviZZer Wax Natural.