LOT - THERMO PAD ZVIZZER ULTRA HARD GRAY 125mm

By Zvizzer

Innovative polishing pad with very high abrasiveness
More cut, more durability, more resistance, more stability
Available in packs of 10, 20, 30 or 50 units!

€102.83

En stock

We recommend you the purchase of the following complementary products

Description

BULK SALE - DECREASING PRICES - ZviZZer Thermo Pad ULTRA HARD Gray 125mm

By set of 10 = 5% discount on your current price

By set of 20 = 10% discount on your current price

By set of 30 = 15% discount on your current price

By set of 50 = 20% discount on your current price

----------------------------------------------------------------------------------------------------------

ZviZZer Thermo Pad Ultra Hard Gray is a pad for orbital or rotary polisher with very strong abrasiveness.

It is therefore ideal and perfectly suited for difficult corrections and hard varnishes showing major defects.

To be used with the polish ZviZZer Pre Cut Scratch Remover, the ZviZZer Heavy Cut Scratch Remover, the famous ZviZZer One Polish or with another hard polish of your choice.

Everything is done to make this pad as efficient as possible: quality of the foam, open-cell structure, foam color, specific glue between the velcro and the foam…

Very versatile, the THERMO PAD pads are designed to be used with an orbital polisher (Dual Action / eccentric), a forced rotation polisher or a rotary (circular) polisher.

What are the advantages of ZviZZer THERMO PAD'Z?

Thermostable structure
Increased resistance to high temperature
Greatly reduced deformation
More stable and longer lasting correction process
Significantly extended pad lifetime

The central hole limits pad deformation when it heats, allows better heat dissipation and prevents polish from clumping in the center of the pad.

The ZviZZer combo (pad/polish) has been developed to be perfectly compatible and thus provide the best possible result whether for intensive correction, light correction or even finishing.

Available sizes for the THERMO PAD'Z ZviZZer range:
The dimensions are expressed as follows (velcro dimension/pad thickness/foam working surface dimension)

35/20/55mm
55/20/70mm
80/20/90mm
125/20/140mm
150/20/160mm

Backing plates to use with THERMOPAD ZviZZer pads:

For pads 35/55mm (thus 35mm velcro side), use a 30mm backing plate.
For pads 55/70mm (thus 55mm velcro side), use a 50mm backing plate.
For pads 80/90mm (thus 80mm velcro side), use a 75mm backing plate.
For pads 125/140mm (thus 125mm velcro side), use a 125mm backing plate.
For pads 150/160mm (thus 150mm velcro side), use a 150mm backing plate.

ZviZZer is one of the few pad manufacturers for polishers in Europe. The rigor and design quality of the pads are excellent.

Find the entire ZviZZer THERMO PAD'Z range :

Reference ZV022LTPUHG125-10

Product usage

Pad maintenance and cleaning: During polishing, feel free to brush your pads (with a dedicated brush) or use a compressor air gun to remove dried polish residue. After each use, it’s important to wash your pads to extend their lifespan and ensure optimal efficiency. Use a pad washer or let your pads soak in a bucket of lukewarm water with a bit of APC for 1 hour. Then spray a bit of APC (soft dilution) on the pad, rub it and rinse it thoroughly until all polish residue is removed. Wring out and let air dry. Once dry, store them away from dust.