THERMO PAD ZVIZZER SOFT RED

By Zvizzer

Innovative low-abrasion polishing pad
More cut, more durability, more resistance, more stability
Available in 35mm, 55mm, 80mm, 125mm and 150mm

€4.58

Volume discounts

Quantity	Discount	You Save
10	20%	Up to €9.15
20	25%	Up to €22.88
30	30%	Up to €41.18
40	35%	Up to €64.05
50	45%	Up to €102.94

En stock

We recommend you the purchase of the following complementary products

THERMO PAD ZVIZZER...

€4.58
CARPRO RED MASKING...

€1.58
ZERO FINISH HD 40x40cm

€4.16
DIAMOND 7000 FINE...

€14.16
Total price:

Description

ZviZZer Thermo Pad Soft Red is a pad for orbital or rotary polishers with low abrasiveness.

It is ideal and perfectly suited for the finishing stage to bring out the shine and achieve even more depth than with a standard finishing pad.

To be used with the polish ZviZZer Fine Cut Hologram Remover, the polish ZviZZer Ultra Fine Cut Swirl Remover & Sealing or any other ultra-finishing polish of your choice.

Everything has been implemented so that this pad is as efficient as possible: foam quality, open-cell structure, foam color, specific adhesive between the velcro and the foam…

Very versatile, the THERMO PAD pads are designed to be used with an orbital polisher (Dual Action / eccentric), a forced rotation polisher, or a rotary (circular) polisher.

What are the advantages of the THERMO PAD'Z by ZviZZer?

Thermostable structure
Increased resistance at high temperature
Greatly reduced deformation
More stable and longer-lasting correction process
Significantly extended pad lifespan

The central hole limits pad deformation when it heats up, allows better heat dispersion, and prevents polish from accumulating in the center of the pad.

The ZviZZer combo (pad/polish) was developed to be perfectly compatible and therefore provide the best possible result, whether for intensive, light, or even finishing correction.

Available sizes in the THERMO PAD'Z ZviZZer range:
Dimensions are expressed as follows (velcro size/pad thickness/foam working surface size)

35/20/55mm
55/20/70mm
80/20/90mm
125/20/140mm
150/20/160mm

Backing plates to be used for THERMOPAD ZviZZer pads:

For pads in 35/55mm (thus 35mm velcro side), use a backing plate of 30mm.
For pads in 55/70mm (thus 55mm velcro side), use a backing plate of 50mm.
For pads in 80/90mm (thus 80mm velcro side), use a backing plate of 75mm.
For pads in 125/140mm (thus 125mm velcro side), use a backing plate of 125mm.
For pads in 150/160mm (thus 150mm velcro side), use a backing plate of 150mm.

ZviZZer is one of the few manufacturers of polishing pads in Europe. The precision and design quality of the pads are excellent.

Find the full ZviZZer THERMO PAD'Z range :

Reference ZV055TPSR-35

Product usage

Maintenance and cleaning of the pads: During polishing, feel free to brush your pads (with a dedicated brush) or use a compressor air gun to remove dried polish residues. After each use, it is important to wash your pads in order to extend their lifespan and ensure optimal efficiency. Use a pad washer or let your pads soak in a bucket of warm water with a bit of APC for 1 hour. Then spray a little APC (soft dilution) on the pad, rub it and rinse it thoroughly until all polish residues are removed. Wring out and let air dry. Once dry, store them away from dust.