STABLE HARD PAD BLUE EDGE SLIM

------ AVAILABLE UNTIL STOCKS LAST! Now replaced by the next generation pads ZviZZer All Rounder ------

Zvizzer Stable Hard pad blue EDGE Slim is a highly abrasive polisher pad.

This EDGE version of the ZviZZer pads for rotary polishers (circular polisher) is characterized by the following improvements:

• An "elephant foot" shape for better support and more safety.
• Outer edges with right angles allowing you to get as close as possible to corners and edges.
• The foam side of the pad that will be in contact with the vehicle is slightly concave (hollow) in order to be perfectly flat once slight pressure is applied to the machine.

It is therefore ideal and perfectly suited for difficult corrections and hard varnishes showing significant defects.
In comparison to the red pad of similar abrasiveness, this blue pad is more "stable" as it loses little firmness when it heats up.

To be used with the polish Zvizzer Pre Cut Deep Scratch Remover (or the Heavy Cut Scratch Remover).

Everything is done to make this pad as effective as possible: foam quality, open-cell structure, foam color, specific glue between velcro and foam...

The Stable Hard pad blue EDGE Slim from Zvizzer is a very thin pad with a thickness of 12mm, which makes it very flexible and supple. When combined with the Soft Plate M14 for pad Slim ZviZZer it offers great working flexibility and significant time savings.

Zvizzer is above all a system entirely designed to simplify your work and avoid mistakes thanks to a color code (blue/red/orange/yellow/green) shared by pads, microfibers and polishes.
The Zvizzer combo (pad/polish) has been developed to be perfectly compatible and therefore deliver the best possible result whether for intensive correction, light correction, or even finishing.

Available sizes for the EDGE Slim Zvizzer range:
The dimensions are expressed as follows (velcro size/foam working surface size/pad thickness)

• 76/90/12mm
• 140/150/12mm

Backing plates to be used for EDGE Slim Zvizzer pads:

• For pads in 76/90mm (thus 76mm on the velcro side), you should use a backing plate of 75mm. Thanks to its shape, the working surface is 90mm and minimizes all risks.
• For pads in 140/150mm (thus 140mm on the velcro side), you should use a backing plate of 125mm. Thanks to its shape, the working surface is 150mm and minimizes all risks. Ideal plate: Soft Plate M14 for pad Slim ZviZZer.

Zvizzer is the brand of one of the few pad manufacturers for polishers in Europe. The precision and quality of the pad design are excellent. 
All Zvizzer pads are designed and manufactured in Germany and are compatible with all well-known polish brands in the Detailing world.