HEAVY CUT RED EDGE SLIM PAD

------ AVAILABLE UNTIL STOCKS RUN OUT! Now replaced by the new generation pads ZviZZer All Rounder ------

Zvizzer Heavy cut red EDGE Slim pad is a pad for a polisher with high abrasiveness.

This EDGE version of the ZviZZer pads for rotary polisher (circular polisher) is characterized by the following improvements:

• An "elephant foot" shape for better support and more safety.
• Outer edges with right angles to get as close as possible to corners and edges.
• The foam side of the pad that will be in contact with the vehicle is slightly concave (hollow) so that it is perfectly flat once slight pressure is applied on the machine.

It is therefore ideal and perfectly suited for difficult corrections and hard varnishes with major defects.
To be used with the polish Zvizzer Heavy Cut Scratch Remover or with another hard polish of your choice.

Everything is done to make this pad as effective as possible: quality of the foam, open-cell structure, color of the foam, specific adhesive between the velcro and the foam...

The Heavy Cut pad red EDGE Slim from Zvizzer is a very thin pad with a thickness of 12mm, which allows it to be very flexible and pliable. Combined with the Soft M14 Backing Plate for Slim ZviZZer Pad it will provide great working flexibility and significant time savings.

Zvizzer, above all, is a system entirely designed to make your task easier and prevent mistakes thanks to a color code (blue/red/orange/yellow/green) common to pads, microfibers, and polishes.
The Zvizzer combo (pad/polish) has been developed to be perfectly compatible and therefore bring the best possible result whether for intensive correction, light correction, or even finishing.

Available sizes for the EDGE Slim Zvizzer range:
The dimensions are expressed as follows (velcro dimension/foam working surface dimension/pad thickness)

• 76/90/12mm
• 140/150/12mm

Backing plates to be used for EDGE Slim Zvizzer pads:

• For pads in 76/90mm (thus 76mm velcro side), it is recommended to use a 75mm backing plate. Thanks to its shape, the working surface is 90mm and minimizes all risks.
• For pads in 140/150mm (thus 140mm velcro side), it is recommended to use a 125mm backing plate. Thanks to its shape, the working surface is 150mm and minimizes all risks. Ideal plate: Soft M14 Backing Plate for Slim ZviZZer Pad.

Zvizzer is the brand of one of the few manufacturers of pads for polishers in Europe. The precision and design quality of the pads are excellent. 
All Zvizzer pads are designed and manufactured in Germany and are compatible with all known polish brands in the world of Detailing.