THERMO MINI PAD FINE YELLOW x5

By Zvizzer

THERMO high-quality pad
Designed and manufactured in GERMANY
Perfect for the Autotriz Nano Polisher

€5.75

En stock

Description

Zvizzer Thermo Mini pad Fine yellow is a finishing pad for Autotriz Nano Polisher Kit 2.0 with low abrasiveness.

It was specifically designed by Zvizzer at our request to fit the Autotriz Nano Polisher Kit 2.0, the ShineMate MPK-3 or small Dremel-type devices.

It is therefore ideal and perfectly suited for the finishing step that brings out the gloss and removes holograms.
To be used with the polish Zvizzer Fine Cut Hologram Remover or another finishing polish of your choice.

Everything is done to make this pad as efficient as possible: foam quality, open-cell structure, foam color, specific glue between the Velcro and the foam...

Zvizzer, above all, is a system entirely designed to make your task easier and avoid mistakes thanks to a color code (blue/red/orange/yellow/green) common to pads, microfibers, and polishes.
The Zvizzer combo (pad/polish) has been developed to be perfectly compatible and thus provide the best possible result whether for intensive, light, or even finishing correction.

Sizes available for the Nano Zvizzer range:

Diameter: 15mm / Thickness: 10mm
Diameter: 25mm / Thickness: 10mm

Zvizzer is the brand of one of the few manufacturers of pads for polishers in Europe. The rigor and quality of pad design are excellent.
All Zvizzer pads are designed and manufactured in Germany and are compatible with all well-known polish brands in the world of Detailing.

Sold in sets of 5 Thermo Mini pads.

Reference ZVIZZER-NANO15J

Product usage

Maintenance and cleaning of pads:

During polishing, feel free to brush your pads (with a dedicated brush) or use a compressor air gun to remove dried polish residue.
After each use, it is important to wash your pads in order to extend their lifespan and ensure optimal efficiency. Use a pad washer or let your pads soak in a bucket of warm water with a bit of APC for 1 hour. Then spray a bit of APC (soft dilution) on the pad, scrub it and rinse it thoroughly until all polish residue is gone. Wring out and let air dry. Once dry, store them protected from dust.