THERMO MINI PAD ULTRA FINE VERTICAL x5

By Zvizzer

THERMO high-quality pad
Designed and manufactured in GERMANY
Perfect for the Autotriz Nano Polisher

€5.75

En stock

Description

Zvizzer THERMO Mini pad Ultra Fine green is a pad for Autotriz Nano Polisher Kit 2.0 with very low abrasiveness.

It was specifically designed by Zvizzer at our request to fit on the Autotriz Nano Polisher Kit 2.0, the ShineMate MPK-3 or on small Dremel-type devices.

It is therefore ideal and perfectly suited for the finishing stage in order to make the shine “come out” and achieve even more depth than with a classic finishing pad.
To be used with the polish Zvizzer Ultra Fine Cut Swirl Remover & Sealing or any other ultra-finish polish of your choice.

Everything is done to make this pad as efficient as possible: quality of the foam, open-cell structure, foam color, specific glue between the Velcro and the foam...

Zvizzer, above all, is a system entirely designed to simplify your work and avoid mistakes thanks to a color code (blue/red/orange/yellow/green) common to pads, microfibers, and polishes.
The Zvizzer combo (pad/polish) has been developed to be perfectly compatible and therefore provide the best possible result, whether for intensive correction, light correction, or even finishing.

Available sizes for the Nano range Zvizzer :

Diameter: 15mm / Thickness: 10mm
Diameter: 25mm / Thickness: 10mm

Zvizzer is the brand of one of the few manufacturers of polishing pads in Europe. The rigor and design quality of the pads are excellent.
All Zvizzer pads are designed and manufactured in Germany and are compatible with all polish brands known in the world of Detailing.

Sold in sets of 5 Thermo mini pads.

Reference ZV051TMPUFV5-15

Specific References

ean13: 4260762263167

Product usage

Maintenance and cleaning of pads:

During polishing, do not hesitate to brush your pads (with a dedicated brush) or use a compressor air blower to remove dried polish residues.
After each use, it is important to wash your pads in order to extend their lifespan and ensure optimal efficiency. Use a pad washer or let your pads soak in a bucket of warm water with a bit of APC for 1 hour. Then spray a bit of APC (soft dilution) on the pad, rub it, and rinse it thoroughly until all polish residues are removed. Wring it out and let it air dry. Once dry, store them protected from dust.