MEDIUM THERMO TRAPEZOID PAD

Medium abrasiveness pad for polisher, buffer

ZviZZer Medium Thermo Trapez Pad is a moderately abrasive pad for orbital polisher (eccentric polisher), roto-orbital or forced rotation.

It is therefore ideal and perfectly suited for moderate corrections or for medium-hard varnishes with significant defects.

For optimal results, it is recommended to use it with the polish ZviZZer Medium Cut One Step or the famous ZviZZer One Polish (1 step: cut, gloss, protect).

Everything is done to make this pad as efficient as possible: quality of the foam, open-cell structure, color of the foam, specific glue between the velcro and the foam…

Very versatile, the THERMO TRAPEZ PAD are designed to be used with an orbital polisher (Dual Action / eccentric) or a forced rotation polisher.

What are the advantages of the THERMO TRAPEZ PAD from ZviZZer?

• Thermostable structure
• Increased resistance to high temperature
• Greatly reduced deformation
• More stable and more durable correction process
• Significantly extended pad lifespan

Zvizzer, is above all a system fully designed to simplify your task and avoid mistakes thanks to a color code (blue/red/orange/yellow/green) common to pads, microfibers and polishes.

The central hole (present on the pads in 80mm, 125mm and 150mm) limits the deformation of the pad when it heats up, allows better heat dispersion and prevents the polish from clumping in the center of the pad.

The trapezoidal shape allows for unmatched stability and "support" mainly with orbital polishers that require their backing plate (backing plate) and therefore their pad to be as parallel as possible with the bodywork.

Unlike most trapezoidal-shaped pads on the market, TRAPEZ Zvizzer pads are beveled all around the edge of the pad that is in contact with the bodywork. Without this, the edges are very sharp and become damaged more easily, especially if they laterally touch another element than the one being corrected.

The ZviZZer combo (pad/polish) has been developed to be perfectly compatible and therefore provide the best possible finish whether for intensive correction, light correction or even finishing.

Available sizes for the THERMO TRAPEZ PAD ZviZZer range:
The dimensions are expressed as follows (velcro size/pad thickness/foam size working surface)

• 35/20/45mm
• 55/20/70mm
• 80/20/90mm
• 125/20/135mm
• 150/20/165mm

Backing plates (backing plate) to be used for the THERMO TRAPEZ PAD ZviZZer :

• For pads in 35/45mm (thus 35mm velcro side), it is appropriate to use a 30mm backing plate.
• For pads in 55/70mm (thus 55mm velcro side), it is appropriate to use a 50mm backing plate.
• For pads in 80/90mm (thus 80mm velcro side), it is appropriate to use a 75mm backing plate.
• For pads in 125/135mm (thus 125mm velcro side), it is appropriate to use a 125mm backing plate.
• For pads in 150/165mm (thus 150mm velcro side), it is appropriate to use a 150mm backing plate.

ZviZZer is the brand of one of the few manufacturers of pads for polishers in Europe. The precision and design quality of the pads are excellent.

Find the entire ZviZZer THERMO PAD'Z range :

• ULTRA HARD THERMO TRAPEZ PAD
• HARD THERMO TRAPEZ PAD
• MEDIUM THERMO TRAPEZ PAD
• SOFT THERMO TRAPEZ PAD
• ULTRA SOFT THERMO TRAPEZ PAD

The 15mm and 25mm pads designed for mini polishers or extensions to be coupled with a rotary polisher are part of the THERMO MINI PADS range.

THERMOTRAPEZPAD