CYCLONE Z-011

By Car Tool

Compressed air foam cannon
Ideal for outdoor and indoor surfaces
Dense foam

€74.92

Last items in stock

Description

Car Tool Cyclone Z-011 is a cleaning gun that operates with compressed air. It requires a minimum 90-liter compressor and an air flow between 6 bars and 8 bars inclusive.

Car Tool Cyclone Z-011 is a professional-quality pneumatic cleaning gun foam diffuser that acts like a foam lance (foam cannon). The wide nozzle is ideal for exterior surfaces and the fine nozzle for interior surfaces.

Coupled with a compressor, it mixes compressed air with cleaning products and transforms them into ultra-dense foam that adheres to all types of surfaces. It increases the efficiency of cleaning by prolonging the contact and action time of the product on the surfaces.

Very easy to use, it is ideal for degreasing and deep cleaning all types of vehicles (car, motorcycle, boat, caravan...).

Technical characteristics of the Cyclone Tornador Z-011 cleaning gun:

- Rotation power: 3000 revolutions / minute

- Air consumption: 75 – 140 liters / minute at 6.2 bars

- Tank capacity: 1 liter

Delivered with a 1-liter jar, an extra cap for the pot, two nozzles (wide + fine) and a ¼ male Teflon connector.

Good to know:

CYCLONE ® is a registered trademark of the manufacturer CAR TOOL

Our pneumatic guns Cyclone Z-011 are authentic. Verify this by checking the points below:

Stamping and engraving "Car Tool" and "Cyclone".
Mention of minimum and maximum pressure
Serial number
Graduated tank
Mention of month and year of manufacture
Usage precautions (pictograms)

Reference CT005Z011

Specific References

ean13: 7688550102851

Product usage

Use Exterior cleaning – wide nozzle: Wet the vehicle with a garden hose or high-pressure washer to loosen contaminants deposited on the bodywork. Install the wide nozzle to spread a large volume of foam in minimum time for cleaning large exterior surfaces. Pour the shampoo and water into the Cyclone Z-011 gun container following the manufacturer's dilution recommendations. Generously spray the foam onto the bodywork. Rinse with clean water using a garden hose or high-pressure washer. Interior cleaning – narrow nozzle: First remove dirt present on the surfaces to be cleaned using a nylon brush and a vacuum cleaner. Install the narrow nozzle to better control the volume of foam and reduce splashing in delicate areas or confined spaces inside a cabin. Pour the interior cleaner and water into the Cyclone Z-011 gun container following the manufacturer's dilution recommendations. Spray the foam onto the mats and seats. Let it act and scrub with a brush. Wipe with a dry, clean microfiber cloth. Cyclone Z-011 cleaning gun usage tips: Do not use acidic products. Strictly follow the manufacturers' dilution recommendations. After each use, rinse your equipment with clean water.