CYCLONE Z-020

Car Tool Cyclone Z-020 is a cleaning gun operating with compressed air. It requires a compressor of at least 90 liters and an air flow rate between 4.5 bars inclusive and 6 bars inclusive. 

The cleaning gun Cyclone Z-020 sprays a mist of compressed air that can be used with or without additional cleaning product.

The outgoing air is set into rotation with a "Tornado" effect that removes with extreme force dirt particles on all types of surfaces.

The Cyclone Z-020 develops a rotation technology different from the Cyclone Z-010. It works thanks to a ball bearing system that offers you more power, a longer lifespan, and less noise during use. Air consumption and noise have been greatly reduced. Simply because the device no longer comes into contact with the cone. 

It is ideal for interior cleaning (dashboard, air vents, around seats, glove compartments, gear lever, pedals...) as well as for the exterior of all types of vehicles (fuel flap, license plates, rims, trunk interior, cabin, floor mats, engine...).

You can cut off the flow of product using the tap and then use the washing gun Cyclone only with air to dry the cleaned surface more quickly.

The Cyclone Z-020 must be cleaned after each use in order not to reduce its lifespan. See the "Instructions for use" tab.

Excellent manufacturing quality. 

- Black plastic cone

- "Tornado" effect aluminum hose / ball bearing

- Rotation power: 3000 revolutions/min.

- Tank capacity: 1L

- Selection "air mist" or "mist with product" by shut-off valve

- Air consumption: 130 liters/minute at 6.2 bars.

- Integrated air supply adjustment valve

Good to know:

CYCLONE ® is a registered trademark of the manufacturer CAR TOOL

Our pneumatic guns Cyclone Z-020 are authentic. Check it by verifying the points below:

• Stamping and punching "Car Tool" and "Cyclone".
• Indication of minimum and maximum pressure
• Serial number
• Graduated tank
• Indication of month and year of manufacture
• Safety precautions (pictograms)