EB351-3/12 MINI CORDLESS ORBITAL POLISHER

Mini cordless polisher

The Shinemate EB351-3/12 is a cordless orbital mini polisher with a 12mm orbit.

It is equipped with a brushless motor, a dual-speed regulation system, and a double reduction gear system:

• The brushless motor offers high torque, greater efficiency, and smoother operation.
• The dual-speed regulation system allows complete control over the machine when needed, whether through the speed selection dial or directly via the progressive trigger.
• The double reduction gear system provides double torque output, enabling low-speed polishing with high torque, ideal for heat-sensitive areas.

The battery-powered orbital polisher EB351-3/12 is equipped with digital control technology that allows soft start to prevent polish from splattering on the vehicle.
This same technology provides overload protection, thereby extending the life of the machine.

Aesthetically, the ShineMate EB351-3/12 exudes quality and offers an ergonomic design.
The components of this orbital version have been carefully selected to minimize vibrations and enhance user comfort.
The head of the polisher and the handle are made of "soft-grip" material for a soft and comfortable grip.
A small "soft-grip" support is also present on the top of the machine across its width, allowing it to be placed upside down without damage when not in use.
Finally, the backing plate with numerous holes is also ideal for reducing heat and dust.

Crucial point for a cordless polisher: THE BATTERIES!

Here again, quality was prioritized by opting for  5.0Ah batteries.
The lifespan of the batteries is therefore over 500 recharge cycles.
Depending on the speed at which you work, the batteries will offer 30 to 45 minutes of runtime and will fully recharge in about 60 minutes.

The charger has two slots to charge 2 batteries.
The charger as well as the batteries feature AIRCOOL technology, allowing cooling during charging and use.

GOOD TO KNOW
Always use a pad larger than your backing plate to avoid any risk of damaging your varnish.
Since the ShineMate EB351-3/12 comes with a 75mm backing plate, you will therefore need pads of at least 80mm.

Technical specifications:
Power: 18V
Capacity: 5.0Ah
Rotation speed: 2000-5000 orbits/min
Orbit: 12mm
backing plate: 75mm
Weight (without battery): 1.8 Kg
Recommended ambient temperature: +4 to +40°C

Delivered with: 
- 1 orbital polisher EB351-3/12
- 1 charger
- 2 batteries 18V 5.0Ah
- 1 75mm (3") backing plate
- 1 tool for backing plate change

Smart extras:
- Storage or transport bag
- Additional battery