ADBL CLAY TOWEL (decontamination microfiber)

ADBL Clay Towel is a medium decontamination microfiber (clay towel) and an interesting alternative to the traditional clay bar. The decontamination step is essential before a paint correction or before applying a protective wax. It helps remove water spots, fresh tree sap, iron particles and other surface contaminants deposited on the paint, glass, metal...

This alternative to the clay bar has 3 main advantages:

- it does not require a clay lubricant (claylube), a mild pH neutral shampoo is sufficient

- it has a good lifespan

- it allows you to save a lot of time during the decontamination stage

The decontamination microfiber can be used both on the bodywork and on the windows, headlights, and rims.

Once the surface is decontaminated, it becomes smooth and shiny.

The medium decontamination microfiber (clay towel) has been designed to remove medium contaminations and is therefore recommended before performing polishing or light correction.

Decontamination has never been so easy and economical!

Dimensions: 30 X 30cm

Important:

During the first use of the microfiber, clean the windows first to break in the mitt.

After any decontamination with a mitt, it is advisable to carry out polishing.

Good to know:

If the vehicle has heavy contamination, consider performing a chemical decontamination first: ADBL TAR AND GLUE REMOVER and ADBL VAMPIRE LIQUID.

Never use ADBL CLAY TOWEL with a solvent-based product (such as tar removers, for example).

Do not expose ADBL CLAY TOWEL to temperatures exceeding 35/40°.