Q2M CLAY COARSE 100 grams

By Gyeon

Hard clay bar resistant to chemical products (pH 2 to 11)
Usable with Gyeon Iron
Does not harden and kneads easily

€16.67 (Save 12%)

€14.67

In stock

Description

The Gyeon Q2M Clay Coarse is a decontamination clay bar designed to remove embedded contaminants from the bodywork.

With high abrasiveness, it is designed for all types of paint/glass but should be reserved for mechanical decontamination before polishing.

Made of thermoplastic polymer, it is specifically resistant to chemical products with pH levels ranging from 2 to 11.
This specific structure allows it to remove not only organic contaminants but also non-organic ones (ferrous residues, tar, etc.), leaving the bodywork perfectly smooth.

It can indeed be used with products such as Q2M Iron.

The time savings are considerable (mainly on wheels), since the Gyeon Q2M Clay Coarse allows for ferrous deoxidation along with general decontamination, without dissolving.

It also does not harden like traditional clays and can be kneaded without any problem.

Reference GY026CC

Specific References

ean13: 8809432675006

Product usage

Use

Spray a lubricant such as Gyeon Claylube on the surface to be decontaminated
Once the surface is lubricated, simply pass the clay over the part concerned using straight movements, crossing the passes and without pressure.
Once the clay no longer removes contaminants, remove the Claylube residue with a drying microfiber or rinse the vehicle again.

Tip
Unlike most clays on the market, you can use Gyeon Clay Coarse with an iron decontaminant (Gyeon Iron)!

Find all the essential accessories in the section Decontamination/Accessories