TALON (ceramic rims and calipers)

By Fireball

High-end ceramic protection for rims
Strong water-repellent effect and easy maintenance
Very economical: approx. 5ml/layer/4 rims (exterior)

Description

--- Product reserved for professionals who have made a request by email to benefit from a PRO account ---

NEW: excellent news, the capacity "105ml" now comes in 3 vials of 35ml which allows for perfect preservation of your ceramic in addition to an even more attractive price ;)

Fireball Talon is a high-end ceramic protection (SiO2) for rims.

It is designed to withstand high temperatures while improving its flexibility. It is ideal for minimizing the adhesion of dirt, ferrous particles and other contaminants as much as possible. It is the perfect protection for heavy drivers, track enthusiasts or people who want to greatly facilitate washing.

The Fireball Talon provides an "anti-scratch" effect that will limit the formation of micro scratches while offering excellent hydrophobic protection.

Protection duration: about 12 months.

Fireball is a modern and innovative Korean brand that offers ceramics with the goal of achieving the best possible transparency. The vitrified finish is enhanced while preserving the color of the paint as much as possible.

Be sure to discover all the ceramics that make up the range!

The Talon is delivered in a storage box including:

1 vial of ceramic (50ml) or 3 vials of 35ml (105ml)
2 applicator blocks
5 suede cloths 10x10cm
1 user manual

GOOD TO KNOW:
The Talon is also applicable on unpainted raw exterior plastics!

FIREBALLCERAMIC

Reference FB057TAL-50

Specific References

ean13: 8809569642384

Product usage

Fireball - Talon Beading

Dilution
None

Use

Always work on a clean, dry surface, ideally previously polished.
Degrease the surface beforehand with an IPA cleaner.
Place the suede on the applicator.
Shake the bottle.
Apply about ten drops on the suede then apply in straight and cross passes over an entire part (except for very large parts which can be “divided” in two).
Make sure there is always a sufficient amount of product applied to the surface.
Wait 7 minutes (time varies depending on temperature and humidity level).
Wipe (with a little pressure) with a first anti-scratch microfiber.
Use a second anti-scratch microfiber to ensure no product traces remain.
If you wish to apply a second layer, wait 2 hours.
Wait 24 hours before using the vehicle or exposing it to water or humidity.

Important
Do not apply in sunlight or on a hot surface. Use gloves and if necessary goggles.
Work in a covered and enclosed area. Ideal conditions (15 to 25 degrees and 50 to 70% humidity level).
Do not wash the vehicle within 7 days following the application of the treatment.

Labeling/Allergens

No. UFI: JC40-40VR-H004-TSGT

H315: Causes skin irritation.
H319: Causes serious eye irritation.

Dangerous, observe the precautions for use.