SILLA (ceramic bodywork) 50ml

By Fireball

High-end 8H ceramic protection
High resistance to chemicals
Very economical: 10ml/layer

Description

--- Product reserved for professionals who have made the request by e-mail to benefit from a PRO account ---

Fireball Silla is a high-end ceramic (SiO2) protection.

This ceramic is quite specific since it was developed to offer increased resistance to chemicals, making it THE ideal ceramic to apply if you know that the vehicle will be regularly exposed to aggressive products such as those used in car wash stations for example.

In addition, the Fireball Silla offers excellent hydrophobic protection and provides an "anti-scratch" effect that will limit the formation of micro-scratches.

Protection duration: up to 5 years.

Consumption: very economical (approx. 10ml/layer on a sedan-type vehicle).

Fireball is a modern and innovative Korean brand that offers ceramics with the goal of achieving the best possible transparency. The vitrified finish is amplified while preserving as much as possible the color rendering of the paint.

Do not hesitate to discover all the ceramics that make up the range!

The Silla is delivered in a storage box including:

1 bottle of ceramic of 50ml
2 applicator blocks
5 suede cloths 10x10cm
3 warranty certificates
3 stickers to affix on the protected vehicles
1 user manual

Reference FB052SIL

Product usage

Dilution
None.

Use

Always work on a clean, dry bodywork, ideally previously polished.
Degrease the surface beforehand with an IPA cleaner.
Place the suede on the applicator.
Shake the bottle.
Put about ten drops on the suede, then apply in a straight and cross pattern over an entire panel (except very large panels that can be “divided” in two).
Make sure there is always a sufficient amount of product applied to the surface.
Wait 10 minutes (time varies depending on temperature and humidity rate).
Wipe (with a little pressure) with a first anti-scratch microfiber.
Use a second anti-scratch microfiber to ensure that no trace of product remains.
If you want to apply a second layer, wait 1 hour.
Wait 24 hours before using the vehicle or exposing it to water or humidity.

Important
Do not apply in the sun or on a hot surface. Use gloves and, if necessary, glasses.
Work in a covered and closed area. Ideal conditions (15 to 25 degrees and 50 to 70% humidity).
Do not wash the vehicle within 7 days following the application of the treatment.

Labeling/Allergens

No. UFI: P340-M0TJ-K00N-TRRC

H315: Causes skin irritation.
H319: Causes serious eye irritation.

Dangerous, follow the safety precautions for use.