NANO COAT PRO V2 (super water-repellent nano coating)

By Fireball

Multi-surface ceramic protection
Super hydrophobic + extreme shine
Durability: up to 12 months

Description

--- Product reserved for professionals who have made the request by email to benefit from a PRO account ---

Ceramic protection for car bodywork, wheels, and unpainted raw exterior plastics.

FIREBALL Nano Coat PRO V2 is a ceramic-based protection reserved for professionals, highly loaded with Sio2 (more than 35%).

Its specific composition allows it to chemically bond with your clear coat to form a hard and shiny protective layer. Once properly applied, the treatment will protect your bodywork for a long time.

On which surfaces can this ceramic protection be applied?

car/motorcycle bodywork with a clear-coated paint
unpainted raw exterior plastics
polycarbonate headlights
wheels with clear-coated paint

What are the advantages of the Nano Coat PRO V2?

Durability: up to 1 year
Average consumption: about 20ml for a medium-sized vehicle
Resistance to corrosive and acidic products (pH between 3 and 12)
Boosts gloss and depth
Anti-yellowing
Strong water-repellent effect
Dries at room temperature (no need for an infrared lamp)
Significantly reduces dirt adhesion and greatly facilitates future washes

The Nano Coat PRO V2 from FIREBALL comes in a storage box containing:

1 vial of Nano Coat V2 (35ml or 250ml)
1 applicator block (for the 35ml version only)
3 suede cloths 10x10cm (for the 35ml version only)

Good to know

This product is applicable only on a unprotected vehicle.
Product must be used within 3 months once opened.

Reference FB025NCPV2-35

Specific References

ean13: 8809569643527

Product usage

Dilution
None.

Use

Always work on a clean, dry body, ideally previously polished.
Degrease the surface beforehand with an IPA cleaner.
Place the suede on the applicator.
Shake the bottle.
Apply a generous amount of product onto the suede, then apply in straight lines over an entire panel (except for very large panels that can be “divided” in two).
Do not go back over areas where you have already applied product.
Make sure there is always a sufficient amount of product deposited on the surface.
Wait 2 minutes (time varies according to temperature and humidity level).
Once you see micro-bubbles appear, wipe (with a bit of pressure) with a first scratch-free microfiber dedicated to wiping ceramic coatings.
Use a second scratch-free microfiber dedicated to wiping ceramic coatings to ensure there is no trace of product left.
If you wish to apply a second layer, wait 30 minutes.
Wait 24 hours before using the vehicle or exposing it to water or humidity.

Important
Do not apply in sunlight or on a hot surface. Use gloves and, if necessary, goggles.
Work in a covered and enclosed area. Ideal conditions (15 to 25 degrees and 50 to 70% humidity).
Do not wash the vehicle within 7 days following the application of the coating.
The maintenance of a ceramic coating determines its durability (wash with pH-neutral shampoo + ceramic-based booster ideally after each wash).

Labeling/Allergens

No. UFI: 6030-10UD-M007-7A4J

H315: Causes skin irritation.
H319: Causes serious eye irritation.
H412: Harmful to aquatic life with long-lasting effects.

Dangerous, observe the precautions for use.