PACK 3D MATRIX PRO (Base 50ml + Top 50ml) - ceramic 5 years

By Autotriz

9H ceramic treatment made in Germany
New generation
Long lasting: 5 years

This pack contains

V1 3D MATRIX COATING - BASE SEULE 50ml

€85.83

x 1

V1 3D MATRIX COATING - TOP COAT SEUL 50ml

€78.33

x 1

Description

--- Product reserved for professionals who have made a request by email to benefit from a PRO account ---

NEW GENERATION:

More resistant
More hydrophobic
Very soft touch

The other novelty lies in the fact that this kit is made up not of a single 50ml bottle but of 2 bottles of 50ml. The first bottle is a base coat (provides hardness and 9H resistance) and the second bottle is a top coat (provides strong hydrophobicity, real softness to the touch, and an anti-static effect).
This new version is therefore even more economical for applicators!

Note: it is designed to be applied with 1 layer of base coat and 1 layer of top coat, and the maximum hardness and finish will be achieved with 2 layers of base coat and 1 layer of top coat.

AUTOTRIZ 3D Matrix Pro + TOP COAT v2.0 (formerly AUTOTRIZ V1 3D Matrix Coating) is a ceramic treatment manufactured in Germany that uses a 3D nanotechnology structure to provide extreme clarity, reflections, and unmatched gloss.

The ceramic 3D Matrix PRO provides very long-lasting protection (5 years). It offers very good resistance against micro-scratches, chemicals, and high temperatures.

The AUTOTRIZ 3D Matrix treatment has very pronounced hydrophobic properties that help protect the paint from oxidation, discoloration, dirt, acid rain, salt, UV rays...

In addition, all subsequent washes will be greatly facilitated.

Protection duration: approximately 5 years (in 2 layers).

Hardness: 9H

Thickness (1 layer): 3/5 microns

Contact angle: > 115°

Consumption: economical (about 15ml/layer on a sedan-type vehicle)

Feel free to discover all the ceramics that make up the range!

The 3D Matrix Coating PRO + TOP COAT v2.0 pack is delivered in 2 storage boxes including:

1 bottle of ceramic 3D Matrix PRO (Base Coat: 50ml)
1 applicator block
5 suede cloths 10x10cm
1 sticker to be applied to the protected vehicle

1 bottle of ceramic TOP COAT v2.0 (Top Coating: 50ml)
1 applicator block
5 suede cloths 10x10cm
1 sticker to be applied to the protected vehicle

For usage and application advice: click on the "USAGE ADVICE" tab above.

Reference PACK00063DMP

Product usage

Dilution
None

Use
Application of the 3D Matrix PRO (BASE COAT) vial:

Shake the vial well before use.

Prepare 2 or 3 new short pile, lint-free, edgeless, seamless, ultrasonically cut buffing microfibers such as MADNESS Slogger or KLIN Zero Finish HD for example.
Place one of the supplied suedes (10x10cm) on the applicator block, "soft foam" side, and apply 7–8 drops to the suede.
Work on small areas of about 50x50cm with moderate pressure. Make sure the surface is perfectly covered by applying in cross passes (right to left then top to bottom).
Once the area is covered, wait about 3 minutes (this time may vary depending on the temperature and humidity level of your workspace), then wipe with the first buffing microfiber to "level" the ceramic layer.
Immediately wipe with the second microfiber until there is no more product residue.
Do not hesitate to use a third microfiber to ensure that no ceramic remains on the surface, and check with suitable lamps such as SCANGRIP.
When the layer of 3D Matrix PRO (Base Coat) has been applied to the entire vehicle, you must wait at least 1 hour before applying a second layer or before applying the TOP COAT v2.0 layer.

Application of the TOP COAT v2.0 vial:

Shake the vial well before use.

Prepare 2 or 3 new short pile, lint-free, edgeless, seamless, ultrasonically cut buffing microfibers such as MADNESS Slogger or KLIN Zero Finish HD for example.

Place one of the supplied suedes (10x10cm) on the applicator block, "soft foam" side, and apply 7–8 drops to the suede.
Work on small areas of about 50x50cm with moderate pressure. Make sure the surface is perfectly covered by applying in cross passes (right to left then top to bottom). However, unlike 3D Matrix PRO, you must apply it very quickly!
NO DRYING TIME: wipe with the first buffing microfiber to "level" the ceramic layer.
Immediately wipe with the second microfiber until there is no more product residue.
Do not hesitate to use a third microfiber to ensure that no ceramic remains on the surface, and check with suitable lamps such as SCANGRIP.
Wait 24 hours indoors before using the vehicle and 7 days before washing it.

Infrared lamp drying information (not required):

Drying time can be accelerated with infrared lamps after applying the TOP COAT v2.0 layer.

Minimum 80 cm distance between lamps and surface.
Maximum 70⁰C
Maximum 30 minutes per panel.