CQUARTZ UK EDITION 3.0

By CarPro

Ceramic protection
Average protection duration: 2 years
Available in 30ml, 50ml and 100ml

€49.08

En stock

We recommend you the purchase of the following complementary products

CQUARTZ UK EDITION 3.0

€49.08
ZERO FINISH HD 40x40cm

€4.16
REBORN (cleaner IPA)

€9.99
Total price:

Description

- - - New Formula 3.0: More resistance to aggressive products, enhanced hydrophobic (water-repellent) effect, increased transparency - - -

CarPro CQuartz UK Edition 3.0 is a ceramic protection.

Based on the original version, this "UK Edition" was specifically developed in the United Kingdom for countries with a cold and humid climate (such as France or England).
Its composition therefore allows it to bond more quickly to the surface thanks to new components and a SiO2 concentration reaching 70%, thus resulting in more hardness and more purity (99.9%).

These improvements make CQuartz UK Edition 3.0 a particularly interesting ceramic since it can be applied within a temperature range from 5 to 25°C.
It can be applied to multiple surfaces: bodywork, rims, metal, chrome, headlights...

In addition to its technical aspects, this ceramic offers many other advantages such as its significant hydrophobic effect, its intense shine, its mirror effect or even the ease of maintenance of protected surfaces.

The durability over time of CQuartz UK Edition 3.0 is also impressive since the protection will be effective for up to 24 months (variable depending on maintenance, climatic conditions, mileage, etc.).

Finally, it can be applied to all non-porous surfaces: bodywork, rims, plastics.

Protection duration: about 2 years
Average consumption per layer: about 15ml
Average thickness per layer: 1 to 2 micron
Waiting time between 2 layers: 1h

Tip: For a glossier finish and a softer touch, it is recommended to use CQuartz Gliss as a top coat (upper layer).

CarPro CQuartz UK Edition comes in a kit including:

1x bottle CQuartz UK Edition 3.0 (30 or 50ml depending on the selected option)
1x applicator block for suede cloths
4x suede cloths 10x10cm
1x large suede cloth 40x40cm

Good to know: The CarPro Reload is available as a rebooster for ceramic.

Reference CP035CUK-30

Specific References

ean13: 8809397810238

Product usage

Dilution
None.

Use

Always work on clean, dry bodywork that has ideally been previously polished.
Degrease the surface beforehand with an IPA cleaner.
Place the suede on the applicator.
Shake the bottle.
Put about ten drops on the suede then apply in a straight and crosswise manner on an entire panel (except for very large panels that can be “divided” into two).
Make sure there is always a sufficient amount of product applied to the surface.
Wait 10 minutes (time varies depending on temperature and humidity level).
Wipe (with a little pressure) using a first anti-scratch microfiber.
Use a second anti-scratch microfiber to ensure there are no traces of product left.
If you wish to apply a second layer, wait 1 hour.
Wait 24 hours before using the vehicle or exposing it to water or humidity.

Important
Do not apply in sunlight or on a hot surface. Use gloves and goggles if necessary.
Work in a covered and enclosed area. Ideal conditions (15 to 25 degrees and 50 to 70% humidity level).
Do not wash the vehicle within 7 days following application of the treatment.

Labeling/Allergens
No UFI: G610-E0C2-400X-A06W

H226: Flammable liquid and vapors.
H304: May be fatal if swallowed and enters airways.
H319: Causes severe eye irritation.
H373: Presumed risk of serious effects on organs following repeated or
prolonged exposure.
H412: Harmful to aquatic life, causes long-term adverse effects.

Light naphtha (petroleum), alkylate, modified low boiling point naphtha, Stoddard solvent, low boiling point naphtha – unspecified, Xylene, Toluene.

Danger, follow the precautions for use.