NEOX GLAZE ULTRA 50ml (ceramic treatment UV tracer)

By Polytop

Ceramic protection with UV tracer
Paint/varnish/glossy or matte PPF
Durability: 35,000 to 50,000 km

€66.66

En stock

We recommend you the purchase of the following complementary products

Description

- - - INNOVATION: Ceramic treatment incorporating a UV tracer allowing control of application and wiping with a UV LED lamp - - -

Ceramic protection: bodywork with glossy varnish, satin matte varnish, covering, wrapping, PPF, rims, unpainted raw exterior plastics.

Polytop Neox Glaze Ultra is a 50ml multi-surface ceramic treatment integrating a UV tracer.

The polysilazanes contained in the formulation form a 3D matrix and adhere durably to painted and varnished surfaces (glossy or matte), to anti-gravel protection films (such as stone-chip protection on the lower wings), to plastic protection films (PPF) and to covering/wrapping type films.

A hard, easy-to-clean and extremely hydrophobic protective layer. The gloss, color depth, smoothness and hydrophobicity of the treated surface are considerably improved.

NEOX ® Glaze Ultra also protects against environmental stress, and damage caused by oxidation, salt, acids, insects and rust.

Which surfaces can be protected by this ceramic treatment?

Glossy or matte varnished paint
Direct gloss (paint that has not received layers of varnish over the last coat of paint). Often on older vehicles (youngtimer, old timer, vintage cars...)
Plastic protection films PPF, stone-chip films...
Covering (solvent-resistant)
Painted rims, varnished rims, powder-coated rims
Brake calipers
Aluminum
Unpainted raw exterior plastics

What is the final appearance once the treatment is applied?

On paint covered with glossy varnish or on a glossy PPF/covering film, the gloss will be greatly amplified (even more so on varnish).
On paint covered with satin matte varnish or on a satin matte PPF/covering film, the finish will not be altered and will remain very uniform.

Why is UV tracer ceramic treatment technology a small revolution?

Perfectly even application because no area can be missed thanks to the use of a UV lamp which reveals the areas not yet covered with the ceramic treatment
No streaks due to poor ceramic wiping! (which often require polishing to remove). Indeed, the UV lamp allows confirmation that wiping has been properly carried out.

The 50ml vial comes alone, so remember to get applicators for ceramic application and/or suede cloths with applicator blocks for suede.

Good to know:

This ceramic can be applied with a paint gun ;) Consumption will be higher but this option can be interesting in certain specific cases. Working pressure (2-3 bars). Nozzle (0.8mm to 1.3mm) Standard HVLP compressed air gun. Clean the gun well after use with a cleaner/ipa.
Ceramic shelf life once opened (between 6 and 12 months). The more ceramic remains in the vial, the longer it can last. Always store away from light, cold and heat (around 15-20 degrees).
Silicone-free ceramic treatment.

Neox Glaze Ultra is also available in a KIT that includes the ceramic and a UV LED lamp :).

Ref Polytop 15300050 Neox Glaze Ultra

Reference PT048NGU

Specific References

ean13: 4025734514582

Product usage

Dilution
None.

Use

Work in an enclosed area (between 5 and 30 degrees, 30% to 80% humidity)
Make sure the surface to be treated is perfectly washed and dried
Degrease the surface beforehand with an IPA cleaner.
Before use, shake the bottle well for at least 30 seconds
Equip yourself with safety equipment (nitrile gloves and protective mask)
Deposit about twenty drops on the suede previously placed on the applicator block
Apply the NEOX GLAZE ULTRA one part at a time (except the hood in 2 steps) in cross passes.
The flash time (waiting time between the end of the application and wiping) is about 5 to 10 minutes (duration varies depending on temperature and humidity level)
Wipe perfectly with a anti-scratch microfiber dedicated to wiping ceramic treatments.
Then wipe again with a second anti-scratch microfiber dedicated to wiping ceramic treatments
Turn off any light source and check with a UV LED lamp to ensure no wiping has been missed.
If you want to maximize the treatment, apply a second layer at least 1 hour after wiping the first layer.
Let the vehicle dry for 24 hours (no water, no humidity).
Do not wash the vehicle within 10 days following the application of the treatment.
For maintenance and to prolong the treatment as much as possible, apply the Polytop Neox Booster every 2/3 washes.

Important
Do not apply in sunlight or on a hot surface. Apply the product in a well-ventilated area.
Keep the product away from any heat source. Wear protective gloves and masks.
Once the bottle is opened, use within the following months.

Labeling/Allergens

UFI: 86CP-SD0S-C40A-GDAK

H226: Flammable liquid and vapors.
H304: May be fatal if swallowed and enters airways.
H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction.

Aliphatic Hydrocarbons, Polysilazane, organic¹, 3-aminopropyltriethoxysilane, Siloxanes and Silicones, 3-[(2-aminoethyl)amino]propyl Me,di-Me¹.

Dangerous, follow the safety precautions