GLISS 2.0

By CarPro

Ceramic Top Coat
Brings softness and shine to the bodywork
Perfect for boosting your CQuartz treatment

€41.58

En stock

We recommend you the purchase of the following complementary products

GLISS 2.0

€41.58
APPLICATOR FOR SUEDE

€1.66
SUEDINE POUR...

€3.33
ZERO FINISH HD 40x40cm

€4.16
Total price:

Description

- - - GLISS 2.0 - NEW VERSION - BOOSTED PERFORMANCE - - -

This new version stands out through an improvement of everything expected from a top coat: more smoothness, more shine and more hydrophobicity!

Perfect top coat to maximize all CQUARTZ and DQUARTZ ceramics from the brand.

Compatible with glossy, satin and matte varnishes.

Carpro GLISS is a top coat to apply as the final layer or perfect to boost protection during the annual maintenance of your ceramic coating.

This protection will bring shine to your bodywork as well as a smooth and soft appearance. The hydrophobic (water-repellent) effect will also be very pronounced.

Although designed to be used as a ceramic protection booster, GLISS can also be used alone as a complete protection.

The GLISS from CarPro can be applied without any concern on all Cquartz bodywork treatments (4h after application of CQuartz or 45min if using IR lamps) and will help maximize their lifespan ;)

Protection duration: up to 12 months
Average consumption per layer: about 15 to 20ml

CarPro Gliss is delivered in a kit including:

1x CarPro Gliss (30 or 50ml depending on the chosen option)
4x suede cloths 10x10cm
1x applicator block for suede cloths

Recommended working temperature: 5 to 30°.

Reference CP062GLIS2-30

Specific References

ean13: 8809397810917

Product usage

Dilution
None.

Use

Always work on a clean, dry bodywork, ideally previously polished.
Degrease the surface beforehand with an IPA cleaner.
Position the suede on the applicator.
Shake the bottle.
Place about ten drops on the suede, then apply in a straight manner and with cross passes on an entire element (except a very large element that can be “divided” in two).
Make sure that there is always a sufficient amount of product applied to the surface.
Wait 10 minutes (time varies depending on temperature and humidity level).
Wipe (with a bit of pressure) with a first anti-scratch microfiber.
Use a second anti-scratch microfiber to ensure that no trace of product remains.
If you wish to apply a second coat, wait 1 hour.
Wait 24 hours before using the vehicle or exposing it to water or humidity.

Important

Do not apply in the sun or on a hot surface. Use gloves and if necessary goggles.
Work in a covered and enclosed area. Ideal conditions (15 to 25 degrees and 50 to 70% humidity level).
Do not wash the vehicle within 7 days following application of the treatment.

Labelling/Allergens

H412: Harmful to aquatic organisms, causes long-term adverse effects.