ANGEL TEARS II 50ml (multi-surface ceramic treatment)

By Fireball

Multi-surface ceramic protection
Very easy to apply
Durability: up to 24 months

€41.66

En stock

We recommend you the purchase of the following complementary products

Description

Ceramic protection for car bodywork, rims, raw unpainted exterior plastics, windows, accessible to everyone

FIREBALL Angel Tears is a ceramic treatment accessible to everyone. It’s ideal for getting started with your first ceramic coating application!

Fireball has managed to offer a high-quality car/motorcycle ceramic at a low price :)

Its specific composition allows it to chemically bond with your clear coat to form a hard and shiny protective layer. Once properly applied, the treatment will provide long-lasting protection for your bodywork.

On which surfaces can this ceramic protection be applied?

car/motorcycle bodywork with a clear coat paint
raw unpainted exterior plastics
polycarbonate headlights
rims with clear coat paint
glass surfaces (windshield, side windows, sunroof)

What are the advantages of Angel Tears?

Durability: up to 2 years (bodywork) / up to 12 months (rims, exterior plastics, headlights and windows)
Average consumption: 15ml/layer
Number of layers: possibility to apply 1 to 2 layers (with a 1h30 waiting time between 2 layers)
Resistance to products: corrosive and acidic (pH between 3 and 12)
Boosts shine and depth
Anti-yellowing
Strong water-repellent effect
Dries at room temperature (no need for an infrared lamp)
Greatly reduces dirt adhesion and makes future washes much easier

Angel Tears from FIREBALL comes in a storage box that includes:

1 bottle of ceramic (35ml)
1 applicator block
3 suede cloths 10x10cm

Good to know

Another innovation from the brand, Angel Tears features a unique technology that prevents the used applicator from hardening too quickly.

Reference FB002AT

Specific References

ean13: 8809569643534

Product usage

Dilution
None.

Use

Degrease the surface with an IPA cleaner.
Position the suede on the applicator.
Shake the bottle.
Apply a generous amount of product onto the suede, then apply in straight lines over an entire section (except for very large sections which can be “divided” in two).
Do not go over the areas where you have already applied product.
Wait 3 minutes (time may vary depending on temperature and humidity level).
When micro-bubbles appear, wipe (with a bit of pressure) using a first anti-scratch microfiber.
Use a second anti-scratch microfiber to make sure that no product residue remains.
If you wish to apply a second layer, wait 30 min.
Wait 24 hours before using the vehicle or exposing it to water or humidity.

Important
Do not apply in the sun or on a hot surface. Use gloves and, if needed, goggles.
Work in a covered and enclosed area. Ideal conditions (15 to 25 degrees and 50 to 70% humidity).
Do not wash the vehicle within 7 days following the application of the treatment.
The maintenance of a ceramic treatment determines its lifespan (washing pH-neutral shampoo + ceramic-based booster ideally after each wash).

Labeling/Allergens

No. UFI: 6M10-X0T1-Q009-MUSE

H319: Causes serious eye irritation.
H412: Harmful to aquatic life, causes long-lasting adverse effects.

Dangerous, follow the safety instructions for use.