INSPIRE (multi-surface ceramic treatment 18 months)

By Cleantle

Permissive multi-surface ceramic protection
Bodywork, rims, windows, plastics and tire sidewalls
Up to 18 months / 20,000 km

€29.99

Last items in stock

We recommend you the purchase of the following complementary products

INSPIRE...

€29.99
ZERO FINISH HD...

€19.16
ZERO APPLICATOR...

€22.49
REBORN (cleaner IPA)

€9.99
Total price:

Description

Multi-surface ceramic protection: bodywork, rims, windows, plastics, headlights and tire sidewalls

Cleantle Inspire is a new-generation ceramic treatment characterized by its great ease of application and wiping.

In addition, its graphene- and carbon nanotube-based composition gives it extreme versatility and good durability.

Among the many advantages of Cleantle Inspire, we can mention:

Very strong hydrophobicity
Permissiveness and ease of application
Soft touch
Very bright finish and adds depth
Resistance to UV rays and chemicals (pH 3 to pH 12)
High permissiveness: application between 8 degrees and 35 degrees and with a humidity rate between 30% and 80% and even outdoors
Quick drying (12h)
Great ease of maintenance once the treatment is applied

As usual, the brand CLEANTLE makes a point of not using dangerous substances such as SLES, SLS or sodium hydroxide.

Consumption:

10 to 15 ml for a medium-sized sedan
5 to 10 ml for 4 medium-sized rims (inside and outside)
5 to 10 ml for all the glass surfaces of a medium-sized sedan
10 to 15 ml for the rubber and tire sidewalls of a medium-sized sedan

Good to know

Remember to apply Cleantle Ceramic Booster every 4 to 6 months to extend the protection of your INSPIRE ceramic treatment :)

Reference CL018INS-15

Specific References

ean13: 5907489184854

Product usage

Dilution
None.

Use

Make sure that the surface to be treated (body, rim, glass, plastic, tire, headlight) is perfectly washed and dried
Degrease the surface beforehand with a IPA cleaner.
Before use, shake the bottle well for at least 30 seconds
Equip yourself with safety equipment (nitrile gloves and protective mask)
Apply the INSPIRE in sections of about 40x40cm in cross passes with the supplied applicator for the body, windows, headlights, and plastics. Opt for a microfiber applicator for tire sidewalls and rubber surfaces.
The flash time (waiting time between the end of application and wiping) is 1 to 2 minutes (variable duration depending on temperature and humidity rate)
Wipe perfectly with a scratch-free microfiber dedicated to wiping ceramic treatments.
Then wipe again with a second scratch-free microfiber dedicated to wiping ceramic treatments
For tire sidewall treatment, depending on their age and condition, they may more or less "absorb" the ceramic treatment. Do not hesitate to wipe off the excess if necessary.
Let the vehicle dry for at least 12 hours (no water, no humidity). Ideally, 24 hours of drying.
Do not wash the vehicle within 7 days following the application of the treatment.
For maintenance and to prolong the treatment as much as possible, apply the Cleantle Ceramic Booster approximately every 3 months.

Important
Do not apply in sunlight or on a hot surface.
Apply the product in a well-ventilated area.
Application possible outdoors (moderate temperature, in the shade and without wind).
Keep the product away from any source of heat.
Wear gloves and protective masks.
Once the bottle is opened, use it within the following months.

Labeling/Allergens

UFI: RR10-20JQ-0000-2EMV

H304: May be fatal if swallowed and enters airways.
H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction.
H336: May cause drowsiness or dizziness.

Light distillates (petroleum), Hydrotreated, n-butyl acetate, Heavy naphtha (petroleum), Hydrotreated, Cyclosilazanes, Di-Me, Me hydrogen, Polymers with di-Me, Me hydrogen silazanes, Reaction products with Silane, Trimethoxymethyl-3-aminopropyltriethoxysilane.

Dangerous, observe the precautions for use