ADMIRE (multi-surface ceramic treatment 36 months)

By Cleantle

Multi-surface ceramic protection with UV tracer
Bodywork, rims, windows, plastics and tire sidewalls
3 years / 50,000 km and up to 5 years / 100,000 km

€49.99

En stock

We recommend you the purchase of the following complementary products

Description

- - - INNOVATION: Ceramic treatment integrating a UV tracer allowing control of the application with a UV lamp - - -

Multi-surface ceramic protection: bodywork, rims, windows, plastics, headlights and tire sidewalls

Cleantle Admire is a new-generation ceramic treatment that is very interesting in many ways.

Indeed, its composition based on graphene and carbon nanotubes gives it excellent versatility and durability.

Among the many advantages of Cleantle Admire, we can mention:

Very strong hydrophobicity
Long durability (3 years 50,000 km)
Enhanced antistatic effect
Soft touch
Very glossy finish and adds depth
Resistance to UV rays and chemical products (pH 3 to pH 12)
Great permissiveness: application between 8 degrees and 35 degrees and with a humidity level between 30% and 80%, even outdoors
Quick drying (12h)
Great ease of maintenance once the treatment is applied

In addition to its shine and depth characteristics, the ingenuity of this treatment lies in the UV tracer it contains. Indeed, it is now possible to check that the ceramic application is perfectly uniform thanks to a UV lamp ;) A real step forward for improved work quality.

As usual, the brand CLEANTLE takes pride in not using dangerous substances such as SLES, SLS or sodium hydroxide.

Consumption:

10 to 15 ml for a medium-sized sedan
5 to 10 ml for 4 medium-sized rims (inside and outside)
5 to 10 ml for all the glass surfaces of a medium-sized sedan
10 to 15 ml for the rubber and tire sidewalls of a medium-sized sedan

Good to know

Remember to apply Cleantle Ceramic Booster every 4 to 6 months to extend your ADMIRE ceramic treatment protection up to 5 years and 100,000 km :)
Also remember to get the UV lamp that reveals the UV tracer present in the ceramic (no more poor applications and forgotten wiping).

Reference CL001ADM-15

Specific References

ean13: 5907489184656

Product usage

Dilution
None.

Use

Ensure that the surface to be treated (bodywork, rim, window, plastic, tire, headlight) is perfectly washed and dried
Degrease the surface beforehand with an IPA cleaner.
Before use, shake the bottle well for at least 30 seconds
Equip yourself with safety equipment (nitrile gloves and protective mask)
Apply ADMIRE in sections of approximately 40x40 cm in cross passes with the supplied applicator for the bodywork, windows, headlights and plastics. Choose a microfiber applicator for tire sidewalls and rubber surfaces.
The flash time (waiting time between the end of application and wiping) is 1 to 2 minutes (duration may vary depending on temperature and humidity rate)
Wipe thoroughly with a scratch-free microfiber dedicated to wiping ceramic treatments.
Then wipe again with a second scratch-free microfiber dedicated to wiping ceramic treatments
For the treatment of tire sidewalls, depending on their age and condition, they may more or less “absorb” the ceramic coating. Do not hesitate to wipe off any excess if needed.
Let the vehicle dry for a minimum of 12 hours (no water, no humidity). Ideally, 24 hours of drying.
Do not wash the vehicle within 7 days following the application of the treatment.
For maintenance and to extend the treatment as long as possible, apply Cleantle Ceramic Booster approximately every 3 months.

Important
Do not apply in sunlight or on a hot surface.
Apply the product in a well-ventilated area.
Application possible outdoors (moderate temperature, in the shade and without wind).
Keep the product away from any source of heat.
Wear gloves and protective masks.
Once the bottle is opened, use within the following months.

Labeling/Allergens

UFI : 8H00-Y0W4-Q002-SNFY

H304 : May be fatal if swallowed and enters airways.
H314 : Causes severe skin burns and eye damage.
H317 : May cause an allergic skin reaction.
H336 : May cause drowsiness or dizziness

n-Butyl acetate, Hydrocarbons, C10-C13, N-alkanes, Isoalkanes, Cyclics, < 2% aromatics, Silane, Trimethoxymethyl-Cyclosilazanes, Di-Me, Me hydrogen, Polymers with di-Me, Me hydrogen silazanes, Reaction products with 3-aminopropyltriethoxysilane.

Dangerous, follow the safety precautions for use