EXO V5 HYBRID COATING

By Gtechniq

Ceramic Top Coat
Beautiful hydrophobic effect and strong shine
Up to 2 years of protection

€49.92

En stock

We recommend you the purchase of the following complementary products

EXO V5 HYBRID COATING

€49.92
APPLICATOR FOR SUEDE

€1.66
SUEDINE POUR...

€3.33
ZERO FINISH HD 40x40cm

€4.16
Total price:

Description

Gtechniq Exo v5 Hydrophobic Coating is a ceramic "top coat" protection for bodywork.

Differences between V4 and V5:

Durability
Chemical resistance
Better preservation once the bottle is opened

In addition to providing long-lasting protection (up to 2 years), this protection will give your vehicle a very pronounced shine and a strong water-repellent (hydrophobic) effect.

The Exo V5 can be applied as a stand‑alone protection (on most vehicles) or as a Top Coat (finishing layer) on top of C1 Crystal Lacquer or Crystal Serum Light (recommended on fragile clear coats or dark vehicles).

It can be used on paint, rims, metals, and plastics.

Available in 30ml and 50ml.

The EXO V5 comes in a storage box including:

1x ceramic vial (30 or 50ml)
1x pair of nitrile gloves
1x applicator
1x sticker to place on the protected vehicle
1x user manual

Reference GT009EXOV5-30

Specific References

ean13: 5060147729917

Product usage

Dilution
None.

Use
Good to know if you apply Exo V5 as a top coat:

On the C1: Apply Exo V5 no sooner than 3h after the C1 and no later than 10h after.
On the CSL: Apply Exo V5 immediately after the CSL and no later than 24h after.

Degrease beforehand the surface to be protected with Panel Wipe.
Place 5 to 10 drops of Exo V5 on the application pad.
Apply on the vehicle in areas of 60x60cm maximum.
Once Exo V5 is applied, wipe it after 2 min maximum (if the ambient temperature is between 5 and 15°C) or after 1 min maximum (if the ambient temperature is between 15 and 25°C). Above 25°C, wipe immediately.
Regularly fold your microfiber wiping cloth in order to use the different sides.
Gtechniq recommends applying a second coat of Exo V5 to ensure you have achieved a uniform application.
It is not necessary to wait before applying a second coat of Exo V5.
Let Exo V5 bond to the varnish for at least 12h (ideally 24h) without contact with water.
Do not wash the vehicle for 1 week.

Important
Always work in the shade, on a cool surface and do not let the product dry.
Do not forget to wear your protective equipment: nitrile gloves and mask.

To be used within 12 months after purchase and within 3 months after opening.

Labeling/Allergens

No. UFI: YYT2-D1D3-440V-YJDP

H304 - May be fatal if swallowed and enters airways.

Light distillates (petroleum), hydrotreated.

Dangerous, observe the precautions for use.