Q2 MOHS EVO Light Box

By Gyeon

Ceramic body treatment
Light Box
Available in 30ml, 50ml and 100ml

€65.83

En stock

Important! Do you already have the following complementary products?

Description

The EVO range is, as its name suggests, an interesting evolution in more ways than one of GYEON brand ceramic coatings:

Increased durability
Possibility of applying the coatings outdoors
Improved formulation
Enhanced chemical resistance
Single layer

GYEON Q² Mohs Evo Light Box is an ideal ceramic coating for all Detailing professionals.

Its biggest asset: the most advanced single-layer ceramic coating from Gyeon's EVO range!

In addition, one layer is enough to protect the surface effectively and durably. For those who cannot apply a ceramic coating in a garage/closed room, the EVO range allows outdoor application (temperature 15 to 25 degrees, in the shade and at least 12h before being exposed to water or humidity).

Plan for 15 to 25ml for a medium-sized vehicle protected with 1 layer of GYEON Q² Mohs EVO. If you have any doubt, choose the 50ml version.

Up to 48 months of protection (or up to 50,000 km) with 2 layers and up to 36 months of protection (or up to 40,000 km) with 1 layer but with good maintenance, it can be extended (booster Q2M Cure after each wash and drying).

What are the main advantages of protecting your vehicle with a ceramic coating?

The vehicle is completely hydrophobic and as such, will repel water and much of the dirt
Maintenance is quicker and much easier (you are cleaning a hydrophobic surface and not an untreated clear coat)
A very pronounced finish and gloss
Resistance to everyday aggressions (acid rain, salt, road film, UV...)
The clear coat is protected thanks to the microns added when applying the ceramic protection

Technical details:

Compatibility: all types of paint except matte

Durability: up to 48 months or 50,000 km (in 2 layers) and up to 36 months or 40,000 km (in 1 layer)
Consumption: 15 to 25 ml for 1 layer on a medium-sized vehicle
pH resistance: 2 to 11

Durability: 5/5
Gloss: 5/5
Hydrophobic effect: 5/5
Self-cleaning ability: 5/5

Kit contents:

1 x Q2 Mohs Evo 30 ml or 50 ml or 100ml (depending on your choice)
1 x Q2M Coating Applicator
1 x Sticker to place inside the door frame
1 x User manual and maintenance guide

Good to know!

For even better finish and durability, you have the option to apply on top of Q2 Mohs Evo:

Q2 CANCOAT Evo 1h after applying the Q2 Mohs Evo
Q2 WAX after the first wash at least 14 days after applying the Q2 Mohs Evo

Reference GY009MELB-30

Product usage

Dilution
None.

Use
Before application and as before any ceramic application, you will have pre-washed, washed, mechanically and chemically decontaminated your vehicle but also performed a polishing and then degreased (Cleaner/IPA) the entire bodywork which will be protected with Gyeon Q2 Mohs Evo.

Shake the vial of Q2 Mohs Evo and make sure that the surface to be protected is cool and free of dust
Apply 10-15 drops of Q2 Mohs Evo on the Q2M Coating Applicator
Slide the applicator with very light pressure in a straight line from left to right and then from top to bottom in cross passes over a maximum area of 50x50cm
Wipe immediately with a first short-pile, edgeless, scratch-free microfiber
Wipe immediately with a second microfiber to be certain not to forget any ceramic residue
If you wish to apply a second layer, wait 1 hour after applying the first layer
Once the last layer is applied, wait 1 hour before applying Q2M Cure which will serve as a sacrificial layer to protect the ceramic during its curing
Spray Q2M Cure on a clean, dry scratch-free microfiber, spread then wipe over all parts previously protected with Q2 Mohs Evo
Allow the treatment to dry ideally for 24h (minimum 12h without any exposure to water or humidity).

Do not wash the vehicle for 7 days. Maintain with scratch-free accessories and products with neutral pH or designed not to alter the protection.

Important
Always apply in the shade, on a cool surface and do not let the product dry.
Use gloves and if necessary goggles.

Labeling/Allergens

UFI: MAX7-56E4-500J-6YRR

H226: Flammable liquid and vapors.
H304: May be fatal if swallowed and enters airways.
H314: Causes severe skin burns and eye damage.
H411: Toxic to aquatic life with long-lasting effects.

Heavy naphtha (petroleum), hydrotreated, hydrotreated light naphtha, cyclosilazanes, di-Me, Me, hydrogen, polymers with di-Me, Me, hydrogenosilazanes, reaction products with 3-(triethoxysilyl)-1-propanamine.

Dangerous, follow the precautions for use.