Q2 PURE EVO

By Gyeon

Ceramic body treatment
Light Box version
Available in 30ml, 50ml and 100ml

€65.75

En stock

We recommend you the purchase of the following complementary products

Description

The EVO range is, as its name suggests, an interesting evolution in many ways of GYEON ceramic coatings:

Increased durability
Possibility of applying the coatings outdoors
Improved formulation
Enhanced resistance to chemicals
Single layer

GYEON Q² Pure Evo Light BOX is an ideal ceramic coating for professionals or detailing enthusiasts.

Its biggest advantage: an extremely glossy finish!

In addition, one layer is enough to protect the surface effectively and durably. For those who absolutely cannot apply a ceramic coating in a garage/closed area, the EVO range allows outdoor application (temperature 15 to 25 degrees, in the shade, and a minimum of 12h before being exposed to water or humidity).

Count 25 to 30ml for a medium-sized vehicle protected with one layer of GYEON Q² Pure EVO. If you have any doubt, choose the 50ml version.

Up to 36 months of protection (or up to 40,000 km) but with good maintenance, it can be extended (use Q2M Cure after each wash and drying).

What are the main advantages of protecting your vehicle with a ceramic coating?

The vehicle is completely hydrophobic and therefore repels water and a good part of dirt
Maintenance is faster and much easier (you clean a hydrophobic surface, not an untreated clear coat)
A very pronounced shine and gloss
Resistance to daily aggressions (acid rain, salt, road film, UV...)
The clear coat is protected thanks to the microns added when applying the ceramic coating protection

Technical details:

Compatibility: all types of paint except matte

Consumption: 1 kit of 30 ml for 1 layer on a medium-sized vehicle
pH resistance: 2 to 11

Durability: 5/5
Gloss: 4/5
Hydrophobic effect: 5/5
Self-cleaning ability: 4/5

Kit contents:

1 x Q2 Pure Evo 30 ml or 50 ml or 100 ml (depending on your choice)
1 x Q2M Coating Applicator
1 x Sticker to stick inside the door frame
1 x User manual and maintenance guide

Good to know!

For even better gloss and durability, you can apply on top of Q2 Pure Evo:

Q2 CANCOAT Evo 1h after applying Q2 Pure Evo
Q2 WAX after the first wash, at least 14 days after applying Q2 Pure Evo

Reference GY013PELB-30

Specific References

ean13: 8809432672500

Product usage

Dilution
None.

Use
Before application and as before any ceramic installation, you will have pre-washed, washed, mechanically and chemically decontaminated your vehicle but also carried out polishing then degreased (Cleaner/IPA) the entire bodywork which will be protected with the Gyeon Q2 Pure Evo.

Shake the bottle of Q2 Pure Evo and make sure the surface to be protected is cool and free of dust
Apply 10-15 drops of Q2 Pure Evo on the Q2M Coating Applicator
Slide the applicator with very light pressure in a straight manner from left to right then from top to bottom in cross passes over a maximum area of 50x50cm
Wipe immediately (if high temperature or high humidity rate) or wait 5 to 10 minutes (if temperature is around 20 degrees with humidity around 55%) with a first short-pile, edgeless scratch-free microfiber (such as the Soft Wipe or the Dual Side for example)
Wipe immediately with a second microfiber (such as the Soft Wipe or the Dual Side for example) to ensure absolutely no trace of ceramic is left
Once the last layer is applied, wait 1 hour before applying the Q2M Cure which will serve as a sacrificial layer to protect the ceramic during curing
Spray the Q2M Cure onto a clean and dry scratch-free microfiber (such as the Polish Wipe for example), spread then wipe over all the parts previously protected with the Q2 Pure Evo
Let the coating dry ideally for 24h (minimum 12h with no exposure to water or humidity).

Do not wash the vehicle for 7 days.
Maintain with scratch-free accessories and products with neutral pH or designed not to alter the protections.

Important
Always apply in the shade, on a cool surface and do not let the product dry.
Use gloves and eye protection if necessary.

Labeling/Allergens

UFI : 67X7-N6QQ-V002-HN5P

H225 : Highly flammable liquid and vapor.
H304 : May be fatal if swallowed and enters airways.
H361d : Suspected of damaging the fetus.
H373 : May cause damage to organs through prolonged or repeated exposure.
H412 : Harmful to aquatic life with long lasting effects.

Light naphtha (petroleum), Alkylation, Low boiling modified naphtha, Stoddard solvent, Low boiling naphtha - unspecified, Toluene.

Dangerous, observe precautions for use.