Q2 ONE EVO Light Box

By Gyeon

Ceramic treatment up to 24 months or 25000km
Kit with ceramic + booster
Available in 30ml and 50ml

€35.75

Product available with different options

Product victim of its success

Enter your email to be notified as soon as it is available.

We recommend you the purchase of the following complementary products

Description

The EVO range is, as its name suggests, an interesting evolution in several ways of GYEON brand ceramic coatings:

Increased durability
Possibility to apply coatings outdoors
Improved formulation
Enhanced chemical resistance
Single layer

GYEON Q² One Evo is a ceramic coating ideal for beginners or detailing enthusiasts. It is the perfect choice for anyone wishing to start applying ceramic protection.

Its biggest advantage: its ease of application and wiping!

In addition, one layer is enough to protect the surface effectively and durably. For those who absolutely cannot apply a ceramic coating in a garage or enclosed area, the EVO range allows outdoor application (temperature 15 to 25 degrees, in the shade and at least 12h before being exposed to water or humidity).

Expect 25 to 30ml for a medium-sized vehicle protected with one layer of GYEON Q² One EVO. If you have the slightest doubt, choose the 50ml version.

Up to 24 months of protection (or up to 25,000 km) but with good maintenance, it can be extended (using Q2M Cure booster after each wash and drying).

What are the main advantages of protecting your vehicle with a ceramic coating?

The vehicle is completely hydrophobic and therefore repels water and a large part of dirt
Maintenance is quicker and greatly facilitated (you are cleaning a hydrophobic surface and not an untreated clear coat)
A very pronounced finish and shine
Resistance to everyday aggressions (acid rain, salt, road film, UV...)
The clear coat is protected thanks to the microns added when applying the ceramic protection

Technical details:

Compatibility: all types of paint except matte

Durability: up to 24 months or 25,000 km
Consumption: 1 kit 30 ml for 1 layer on a medium-sized vehicle
pH resistance: 2 to 11

Durability: 4/5
Gloss: 4/5
Hydrophobic effect: 4/5
Self-cleaning capacity: 4/5

Kit contents:

1 x Q2 One Evo 30 ml or 50 ml (depending on your choice)
1 x Q2M Coating Applicator
1 x Sticker to stick in the door jamb
1 x User manual and maintenance guide

Good to know!

For even better finish and durability, you can apply over the Q2 One Evo:

Q2 CANCOAT Evo 1 hour after applying Q2 One Evo

Reference GY010OELB-30

Specific References

ean13: 8809432672449

Product usage

Dilution
None.

Use
Before application and as with any ceramic installation, you will have pre-washed, washed, mechanically and chemically decontaminated your vehicle, as well as performed polishing and degreasing (Gyeon Q2M Prep) on the entire bodywork that will be protected with Gyeon Q2 One Evo.

Shake the bottle of Q2 One Evo and make sure the surface to be protected is cool and free of dust
Apply 10–15 drops of Q2 One Evo onto the Q2M Coating Applicator
Slide the applicator with very light pressure in a straight motion from left to right, then up and down in cross passes over a maximum area of 50x50 cm
Immediately wipe with a first short-pile, edgeless, anti-scratch microfiber (such as Soft Wipe or Dual Side, for example)
Immediately wipe with a second microfiber (such as Soft Wipe or Dual Side, for example) to be sure not to miss any trace of ceramic
Once the last layer has been applied, wait 1 hour before applying Q2M Cure, which will serve as a sacrificial layer to protect the ceramic while it dries
Spray Q2M Cure onto a clean, dry, anti-scratch microfiber (such as Polish Wipe, for example), spread and wipe over all the elements previously protected with Q2 One Evo
Let the coating dry, ideally for 24 hours (minimum 12 hours without any exposure to water or humidity).

Do not wash the vehicle for 7 days. Maintain with anti-scratch accessories and pH‑neutral products or those designed not to damage protective coatings.

Important
Always apply in the shade, on a cool surface, and do not let the product dry.
Use gloves and, if necessary, safety glasses.

Labeling/Allergens

UFI: F4X7‑561A‑J00K‑V9KM

H225: Highly flammable liquid and vapour.
H304: May be fatal if swallowed and enters airways.
H373: May cause damage to organs through prolonged or repeated exposure.
H412: Harmful to aquatic life with long‑lasting effects.

Light distillates (petroleum), Hydrotreated, Kerosene – not specified, Light naphtha (petroleum), Alkylation, Modified low‑boiling naphtha, Stoddard solvent, Low‑boiling naphtha – not specified, Toluene.

Dangerous, follow the precautions for use.