ZVIZZER PAINT CERAMIC COATING 50ml

By Zvizzer

Ceramic body protection
Very easy to apply
3 years or 30,000 km

€108.25

En stock

We recommend you the purchase of the following complementary products

Description

Ceramic protection car body

ZviZZer Paint Ceramic Coat is a ceramic treatment for bodywork.

Just like all the brand's products, the goal is to offer a ceramic protection that is very simple to apply while providing performance and durability.

Its specific composition will allow it to chemically bond with your clear coat to form a hard and shiny protective layer. Once properly in place, the treatment will durably protect your bodywork against oxidation, salt, insects, or acidic products.

Thanks to ZviZZer’s Paint Ceramic Coat, the clear coat becomes harder and more scratch-resistant (about 60-65%) than conventional paints thanks to the high-performance particles on the surface. Even if you only wash your vehicle by hand, the risk of generating defects is likely after some time as current clear coats are more sensitive. With ZviZZer Paint Ceramic Coat, this type of defect will be minimized or even avoided.

Once applied to your vehicle, the Paint Ceramic Coat will provide a strong water-repellent effect, which will greatly prevent dirt from sticking and will therefore make all your future washes easier.

PROPERTIES:

Durability: 3 years / 30,000 km
Resistance to products: corrosive and acidic (pH between 3 and 12)
Anti-yellowing
Strong water-repellent effect
Boosts shine and depth

The Paint Ceramic Coat by ZviZZer comes with an applicator block and 3 suede cloths.

Reference Z089PCC

Product usage

Dilution
None.

Use

First degrease the surface with a IPA cleaner.
Place the suede on the applicator.
Put about 12 drops of product on the suede then apply evenly to the bodywork until a transparent film is formed (do not work on a surface larger than 60x60cm).
Allow the product to bond for about 1 to 3 minutes then wipe perfectly with several anti-scratch microfibers dedicated to wiping ceramic coatings.

To maximize the effects of protection, it is possible to apply a second layer (this second layer must be applied no later than 1h after the first layer).

Important
Always work in the shade, on a cool surface and do not let the product dry.
Use gloves and if necessary glasses.

Labeling/Allergens

No. UFI: -

H314: Causes skin burns and serious eye damage.
H412: Harmful to aquatic life, causes long-lasting adverse effects.
H225: Highly flammable liquid and vapor.
H302: Harmful if swallowed.
H336: May cause drowsiness or dizziness.

Dangerous, observe the precautions for use.