CRYSTAL SERUM LIGHT

By Gtechniq

Ceramic treatment for bodywork
High gloss
2 to 3 years of protection

€66.58

En stock

We recommend you the purchase of the following complementary products

CRYSTAL SERUM LIGHT

€66.58
ZERO FINISH HD 40x40cm

€4.16
BINDER - PREMIUM...

€11.66
REBORN (cleaner IPA)

€9.99
Total price:

Description

Gtechniq Crystal Serum Light, also known by the acronym CSL is a long-lasting ceramic coating.

It is the version accessible to everyone of the famous ceramic Crystal Serum only applied by accredited professionals of the Gtechniq network.

This Light version is more forgiving and therefore more suitable for knowledgeable amateurs/enthusiasts.
Indeed, the treatment can, for example, be removed if necessary after a simple polishing, unlike the pro version which will require sanding.

Nevertheless, the Crystal Serum Light offers 80% of the performance of the professional version.
As for gloss enhancement, there is no difference between the two versions.

In terms of durability, the coating will protect your vehicle for 2 to 3 years depending on maintenance and use.

Finally, Crystal Serum Light offers good resistance to harsh chemical products (pH 2-12), a soft touch and a strong water-repellent effect.
Once protected, cleaning your vehicle will be a simple formality :)

Available in 30ml and 50ml.

Reference GT006CSL-30

Specific References

ean13: 5060147721072

Product usage

Dilution
None

Use

Degrease beforehand the surface to be protected with the Panel Wipe.
Apply the equivalent of 2 pipettes (provided) of Crystal Serum Light onto the application pad.
Reseal the bottle and set it down (do not keep it in your hand to avoid warming it up, which could prematurely accelerate its hardening).
Apply on the vehicle in areas of a maximum of 60x60 cm.
Wipe it off after 2 to 3 minutes with moderate pressure (it is recommended to use 2 different microfibers to be sure not to forget to wipe an area).
Regularly fold your wiping microfiber in order to use the different sides.
Let the Crystal Serum Light bond to the clear coat for at least 12h (ideally 24h) without contact with water.
Do not wash the vehicle for 1 week.

Important
Always work in the shade, on a cool surface and do not let the product dry.
Do not forget to wear your protective equipment: nitrile gloves and mask.
Use appropriate lighting, otherwise you may miss a streak when wiping.
Once the wiping is finished, rinse your microfibers immediately so that the C1 does not crystallize in the fiber. It is nevertheless recommended to assign these microfibers afterwards to another use than wiping the bodywork.

To be used within 12 months after purchase and within 3 months after opening.

Hazard statements
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H336: May cause drowsiness or dizziness.
H419: Toxic to aquatic life with long-lasting effects.

Dangerous, observe the precautions for use.