GLISS - HYPER SLICK FINISHING COAT

Ceramic Top Coat
Brings softness and shine to the bodywork
Perfect for boosting your CQuartz treatment

€39.08 (Save 15%)

€33.22

Description

Carpro GLISS is a top coat to be applied as the final layer or perfect for boosting protection during the annual maintenance of your ceramic coating.

This protection will bring shine to your bodywork as well as a smooth and soft appearance. The hydrophobic (water-repellent) effect will also be very pronounced.

Although designed to be used as a ceramic protection booster, GLISS can also be used alone as a full protection.

The GLISS from CarPro can be applied without any problem on all Cquartz bodywork treatments (4h after applying CQuartz or 45min when using IR lamps) and will help maximize their lifespan ;)

Protection duration: up to 12 months
Average consumption per layer: about 15 to 20ml

CarPro Gliss comes in a kit including:

1x CarPro Gliss (30 or 50ml depending on selected option)
4x suede cloths 10x10cm
1x applicator block for suede cloths

Recommended working temperature: 5 to 30°.

Reference CP061GLI-30

Specific References

ean13: 8809397810917

Product usage

Dilution
None.

Use

Always work on a clean, dry bodywork, ideally previously polished.
Degrease the surface beforehand with an IPA cleaner.
Position the suede on the applicator.
Shake the bottle.
Apply about ten drops on the suede then apply in a straight and cross pattern over an entire element (except for very large elements that can be “split” in two).
Make sure there is always a sufficient amount of product applied to the surface.
Wait 10 minutes (time varies depending on temperature and humidity level).
Wipe (with a little pressure) with a first anti-scratch microfiber.
Use a second anti-scratch microfiber to ensure that no product residue remains.
If you want to apply a second layer, wait 1 hour.
Wait 24 hours before using the vehicle or exposing it to water or humidity.

Important

Do not apply in the sun or on a hot surface. Use gloves and, if necessary, goggles.
Work in a covered and enclosed area. Ideal conditions (15 to 25 degrees and 50 to 70% humidity).
Do not wash the vehicle within 7 days following the application of the treatment.

Labeling/Allergens

H412: Harmful to aquatic organisms, causes long-term adverse effects.