PACK Polish Polytop 250ml - Integral

The POLYTOP Polish Pack 250ml INTEGRAL is a turnkey pack "Made in Germany" that will allow you to correct the micro-scratches present on your bodywork. These 6 new generation polishes are water-based (no odor, no dust, do not dry easily, can be worked for a long time and the pads are much easier to clean).

This kit consists of 6 different polishes that will allow you to meet all polishing needs:

1- POLYTOP Rapid One Step Plus 250ml is an ALL-IN-ONE polish designed to provide correction, finishing, and protection in a single step!

It has been specifically designed for anyone looking for extensive correction but also a hydrophobic finish and protection, all within a controlled timeframe.

Indeed, Polytop’s Rapid One Step Plus is ideal for “ONE STEP” (single-step) services. Its triple action removes micro-scratches and moderate defects, delivers a refined finish, and leaves a protective layer on the paintwork, creating a hydrophobic (water-repellent) barrier.

You can apply this polish using an orbital (eccentric) or rotary (circular) polisher.

Cut level: 6/13

2- POLYTOP Diamant 2000 Ultimate Cut 250ml is a hard (intensive) polish with very strong abrasiveness.

The DIAMANT range from Polytop is characterized by highly advanced abrasive polishes that often allow work to be done in a single step thanks to diminishing abrasives.

This polish offers an excellent level of cut (very good abrasiveness) while also providing a perfectly acceptable finish, making it ideal for single-step work on pronounced defects (micro-scratches, car wash swirls, light scratches...). However, if you are looking for a deeper and more brilliant finish, it is recommended to perform a second step with the Diamant 7000 Fine Cut to enhance gloss and finish.

If sanding has been carried out beforehand, Polytop’s Diamant 2000 Ultimate Cut can remove grain 1000 marks.

Water-based polish, generates very little dust, and does not contain silicone.

Can be used with an orbital or rotary polisher.

Cut level: 13/13

3- POLYTOP Diamant 3000 Ultra Cut 250ml is a hard (intensive) polish with strong abrasiveness.

The DIAMANT range from Polytop is characterized by highly advanced abrasive polishes that often allow work to be done in a single step thanks to diminishing abrasives.

This polish offers an excellent level of cut (very good abrasiveness) while also providing a perfectly acceptable finish, making it ideal for single-step work on pronounced defects (micro-scratches, car wash swirls, light scratches...). However, if you are looking for a deeper and more brilliant finish, it is recommended to perform a second step with the Diamant 7000 Fine Cut to enhance gloss and finish.

If sanding has been carried out beforehand, Polytop’s Diamant 3000 Ultra Cut can remove grain 2000 marks.

Water-based polish, generates very little dust, and does not contain silicone.

Can be used with an orbital or rotary polisher.

Cut level: 12/13

4- POLYTOP Diamant 5000 Super Cut 250ml is a medium (intermediate) polish with moderate abrasiveness.

The DIAMANT range from Polytop is characterized by highly advanced abrasive polishes that often allow work to be done in a single step thanks to diminishing abrasives.

This polish is a real “Swiss Army knife”! It offers a very good level of cut as well as an excellent finish, making it ideal for single-step tasks on moderate, typical wear defects (micro-scratches, car wash swirls, light scratches...).

On a soft paint or with moderate defects, it can be used alone or followed by a pass of Diamant 7000 Fine Cut to enhance gloss.

If light sanding has been carried out beforehand, Polytop’s Diamant 5000 Super Cut can remove grain 3000 marks.

Water-based polish, generates very little dust, and does not contain silicone.

Can be used with an orbital or rotary polisher.

Cut level: 10/13

5- POLYTOP Diamant 7000 Fine Cut 250ml is a slightly abrasive finishing polish.

The DIAMANT range from Polytop is characterized by highly developed abrasive polishes that, most of the time, allow you to work in a single step thanks to the diminishing abrasives.

At the beginning of the work, it will provide light abrasiveness to correct minor defects and holograms, then gradually, its correction ability will refine in order to optimize the finish and appearance.

If light sanding has been carried out on the surface beforehand, Diamant 7000 Fine Cut from Polytop can lift the 5000 grit.

Water-based polish, generates very little dust and contains no silicone.

Usable with an orbital or rotary polisher.

Cut level: 5/13

6- POLYTOP Reflex Anti Hologram 250ml is a slightly abrasive finishing polish.

It was specifically designed for anyone looking to achieve a very clean finish and a beautiful result, free of holograms.

Indeed, it is to be used during the finishing stage: it will remove the final light defects such as holograms while restoring depth to your bodywork.

Water-based polish, generates very little dust and contains no silicone.

Cut level: 2/13

Good to know: POLYTOP polishes are made in Germany and generate very little dust.

--> Find the different POLYTOP polish packs below:

• Polish Pack Polytop 250ml - ESSENTIAL (3 polishes)
• Polish Pack Polytop 1L - ESSENTIAL (3 polishes)
• Polish Pack Polytop 250ml - INTEGRAL (6 polishes)
• Polish Pack Polytop 1L - INTEGRAL (6 polishes)

POLISHPOLYTOP